DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   DVD Authoring (https://www.dvinfo.net/forum/dvd-authoring/)
-   -   Using a PAL DVD player in France? (https://www.dvinfo.net/forum/dvd-authoring/113897-using-pal-dvd-player-france.html)

Jack Kelly February 4th, 2008 04:46 AM

Using a PAL DVD player in France?
 
Hi there,

If I took a PAL DVD player from the UK and tried to connect it to a French TV using composite video, would it work?

I am a little confused. I understand that France uses SECAM but I've also definitely played PAL DVDs on French DVD players. Also, as I understand it, almost all modern TVs are designed to auto-detect if the input is PAL, SECAM or NTSC and switch accordingly. Is this correct? (i.e. manufacturers only make one TV which can be used in all territories - it saves them from having to build different hardware for the different territories).

Any help would be very greatfully received!

Many thanks,
Jack

David Heath February 4th, 2008 05:44 AM

Quote:

Originally Posted by Jack Kelly (Post 819778)
I understand that France uses SECAM but I've also definitely played PAL DVDs on French DVD players.

To be completely accurate, a "PAL DVD" should be called a "576i/25 DVD" and could be considered as much a 625 SECAM DVD as a PAL one. The signal recorded is component, and the PAL/SECAM decision only gets made when a COMPOSITE signal is derived from it.
Quote:

Also, as I understand it, almost all modern TVs are designed to auto-detect if the input is PAL, SECAM or NTSC and switch accordingly. Is this correct?
A lot are, though I wouldn't like to generalise. Certainly a lot of French TVs are able to handle PAL as well as SECAM.

Jack Kelly February 4th, 2008 05:55 AM

Excellent reply, thank you.

So, if I understand correctly: is the SECAM/PAL distinction not applicable to component (YUV) and RGB connections?

Many thanks,
Jack

David Heath February 4th, 2008 06:49 AM

Quote:

Originally Posted by Jack Kelly (Post 819796)
So, if I understand correctly: is the SECAM/PAL distinction not applicable to component (YUV) and RGB connections?

Exactly so. SECAM/PAL really refer to the way the U and V signals are combined, modulated, and put on to a carrier for combination with Y to give a single cable connection - composite. Remain component, as with Betacam or any modern digital format, and the only difference between PAL/SECAM equipment is the composite output.

"PAL" tends to get used to refer to 576i/25 in common usage, but PAL-M (used in Brazil) is a 480i/30 system (same as NTSC) but with PAL colour coding for transmission of the composite signal.

There's no definitive answer to your actual original question - "If I took a PAL DVD player from the UK and tried to connect it to a French TV using composite video, would it work?" - the answer is probably "yes", but it would depend on the individual TV, means of connection etc

Jack Kelly February 4th, 2008 06:57 AM

Great, thanks for the excellent explanation. Good, technical stuff.


All times are GMT -6. The time now is 10:49 PM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network