Problem with Canopus ADVC-55 - HELP!
Just bought a Canopus ADVC-55 analogue to digital video converter to digitize some old Betacam SP tapes.
I plug the player into the converter through phono and then the firewire into the computer. The problem is when I go to capture the video, it only shows up in black and white. The signal is clean and the audio is fine, there is just no color. I have tried it with Sony Vegas Pro and iMove HD, but have the same result. I have also changed cables and connected a different input to the converter but again the problem persists. Does anyone know what is causing this, and how to fix it? It's a real pain as these things are not cheap to buy! Thanks |
Check the DIP switches to make sure the device is set to PAL. If you need to change it, make sure you power cycle the device before attempting another capture.
|
Yep, that works!
Interesting because the DIP switches were set to PAL, as it was capturing off a PAL camera. I set all the switches to "off" apart from switch 1, which I set to NTSC. Odd but it worked. Thanks! |
All times are GMT -6. The time now is 07:04 AM. |
DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network