Re: Cyc walls - build or use pre-fab?
 

Even with LED, power requests can often be higher than you expect. Maybe somebody needs to lift something with light weight truss, but they need three phase for the motors. Sometimes people have equipment with power connectors determined by where they usually go. For instance, if you do a music video, then they may bring their touring kit because it does their tracks, in ears and monitors. It will probably be rigged, if it was in the UKm with single or three phase on 63 amp connectors. Even if it only needs less than 10. Having power available if required, makes sense. If you have electricians in, the cost for just in case supplies is trivial but useful.

Re: Cyc walls - build or use pre-fab?
 

Hi again. Wanted to share update. We've been working on design and fixing some things.
Here is our plan.
Planning on building a box building inside of a PEMB box building to isolate from exterior noise.
Plan on having large black curtains that can slide around to cover up things in side the studio as needed (such as green screen and OH door).

Do you recommend the electric panels being where they are or inside the studio?
I'm thinking to increase the audio booth by another 6 or 8 inches to allow for more space to compensate for interior deadening