DIY Building/Duplicating a jib seen on StudioWheels.com ** INPUT NEEDED **
Here is the link to the jib that I am building.
It has the 2 arms like the Kessler, but the arms are round. http://www.studiowheels.com/swcart/p...f7c9e10d3d0f2e My situation: I have an HVX. I would like to a remote pan/tilt to the jib. When the jib is low and I want to pan the camera, how can I get this to work without the camera hitting the arms of the jib? How high should I make the Pan/Tilt head. Or should I just stick to the DSLR and call it a day. Secondly, where the crap can I find the motors needed for this? Any assistance would be most appreciated. |
Re: DIY Building/Duplicating a jib seen on StudioWheels.com ** INPUT NEEDED **
Also, what size motors would I need?
|
Re: DIY Building/Duplicating a jib seen on StudioWheels.com ** INPUT NEEDED **
link isnt working.
david |
Re: DIY Building/Duplicating a jib seen on StudioWheels.com ** INPUT NEEDED **
|
Re: DIY Building/Duplicating a jib seen on StudioWheels.com ** INPUT NEEDED **
Will the Bescor Motorized Pan and Tilt head do: Amazon.com: Bescor MP-360 Full 360° Motorized Pan and Tilt Head For HDslr and Video Camera's Up to 6lb.: Camera & Photo ?
|
Re: DIY Building/Duplicating a jib seen on StudioWheels.com ** INPUT NEEDED **
The Bescor is noisy and crude. Jerky start and stop of pans and tilts.
|
Re: DIY Building/Duplicating a jib seen on StudioWheels.com ** INPUT NEEDED **
I picked up a nice setup at Servo City
|
All times are GMT -6. The time now is 05:29 PM. |
DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network