Powertap for HDD
 

Hi Robert,

Anton Bauer sells a powertap cable for the HDD units. It is called a "POWERTAP-FS4" This is what you may have seen JVC promote. They also make a mounting plate. Full info on the Anton Bauer solution is at:

http://www.antonbauer.com/Product_QR...7-14%20HDV.htm


IDX tells me that there is a company in Nashville that can make you a cable to go from the IDX power tap to the HDD units. Contact info is:

Trew Audio
Contact: Rob
Ph. 615-256-3542
Nashville, TN
e-mail Rob@trewaudio.com

Regards, Carl

Thank you for that information. I'll contact them right now. The JVC information where I saw the bit about the power tap is on the JVC Pro web site. It says:

http://pro.jvc.com/prof/attributes/f...&feature_id=01

The battery bracket has a 14.8V D-Tap accessory cable which will provide power simultaneously to DR-HD100 JVC disk recorder and to a light.

Just an aside...I am constantly blown away with the quality of the camera's image when displayed on a CRT. Very SRIII. We have a Sony 14" HD CRT component in line with a Samsung LCD via HDMI and our LCD computer monitors. The Sony CRT looks stunning and filmlike compared to the LCD's, which are poor in comparison.

Dave Beaty