Confused about which color space the HD110 uses
I'm a little confused about which color space is used/output by the HD110. My current understanding is that the analog CCD detects in 4:2:2 color space. That is reduced to 4:2:0 when recorded on tape or output, via firewire, to a hard disk recorder as an m2T file type. What color space is output via the component video connectors, assuming I'm running in HDV? If I digitize to HD-SDI, via an AJA or BMD card, do I retain the 4:2:2 color mapping?
Thanx for any help you can offer. Bill R |
Based on the JVC blurb ( http://pro.jvc.com/prof/attributes/f...l_id=MDL101642 ), the analog component output is equivalent to 4:2:2.
|
That is for live camera output only though - if the video is already on tape, it would be already compressed and I don't believe that that would be 4:2:2 anymore.
|
Live output is 4:2:2.
Recorded output is 4:2:0. SDI live would be 4:2:2. Dan Weber |
Quote:
For those who don't know, color sampling is a way for digital video to reduce the size of the encoded data and trick our brains so we don't notice. If you are interested, check out the amazing article Graeme Nattress has written. http://www.lafcpug.org/Tutorials/bas...ma_sample.html The point is that JVC never used to specify in their literature how much color information is actually being processed through the 12-bit D-A converter and output to the analog component out. They used the word "uncompressed" which in its literal meaning would suggest 4:4:4 color output, since even dropping the color sampling down to 4:2:2 is a form of compression. However, this new information on HD110 site would seem to contradict that. The simple way to check would be to capture a resolution chart at 4:4:4 and check the resolution of the different channels. |
A very nice article about the color sampling, Tim.
Here is another informative article for Color Space with a testchart showing the differences between 601 and 709. The colors are encoded through a different formula to store the values. 709 has a wider range for HD then the 601 SD when stored. http://www.belle-nuit.com/testchart.html |
yes, I meant color sampling. thanx for the interesting references. that's the first time i've seen a comparison of actual images, having read of the sampling method many times.
so, the remaining question in my mind is the actual and visible differences between 4:2:2 sampling as output over analog component YPbPr vs HD-SDI. I assume there is a quantization error difference...and that's a function of whether it was sampled at 8 bit or 10 bit depth? so, a camera like the HD250 with its HD-SDI output, samples at what bit depth? Perhaps you can see where I'm headed with this....potential image differences between component output and A-D conversion then another D-A conversion for viewing. |
One thing though, recording on a hd100 via component is not the most practical thing in the world. I'm not sure you can get the hardware onto a laptop so that leaves a desktop solution. Okay for studio shoots I guess... Then there's this cool thing called the Wafflean but it's not cheap. I think it's in the trillions of dollars.
|
For awhile, I was thinking D-VHS, as a cheap substitute for the Waffian, however, the JVC DVHS decks record off of 1394 only. No component input. I can look at a really nice image on my HD monitor, staright from the component output on the camera. It seems somewhat odd that I can't also, record that signal on something at 4:2:2.
|
Quote:
|
So, is anyone else as tired as I am of the movie industry treating their customers like criminals? With how incredibly easy it is to make a perfect digital copy of a DVD, I'm amazed that manufacturers are still trying to keep the analog hole closed with stuff like Macrovision that has negative effects on even legitimate users.
|
Quote:
|
Quote:
|
Re: Confused about which color space the HD110 uses
So did anyone figure out if the JVC HD110 or family of camcorders have live output via component as 8 bit or 10 bit 4:2:2? I doubt very very very much it's 4:4:4. Anyway looking at a Samurai or Hypderdeck shuttle and a BlackMagic component to HDSDI converter for progressive signal to make my JVC a B camera for a Red Scarlet set of projects.
|
Re: Confused about which color space the HD110 uses
Unless I'm being very stupid, there isn't any SDI out at all? Just composite and component analogue - plus firewire?
I've actually got one here I just pulled out to double check the sockets. The only digital output is via the firewire in switchable SD/HD |
Re: Confused about which color space the HD110 uses
No, your not being stupid.. there is no HD-SDI outputs on a HD100 series cameras.. HOWEVER you can get a Blackmagic Design Component to HD-SDI converter for $280 ish and then it can be captured via Samurai or BMD Hyperdeck. Other options is live capture by AJA or Intensity Shuttle component to unit to thunderbolt/pci etc to computer.
So the question is the live outputs from the JVC HD series 4:4:4, 4:2:2 and or 10bit or 8 bit? Then it gives different options for equipment. But not willing to spend more than $1,000 or so for the parts since you start encroaching on newer equipment such as Blackmagic Design Cinema cameras and just leave the older equipment in the garage... :) |
Re: Confused about which color space the HD110 uses
No, there aren't any SDI connectors on the GY-HD100 or GY-HD110.
|
Re: Confused about which color space the HD110 uses
Quote:
|
Re: Confused about which color space the HD110 uses
I'll guess I'll order the Blackmagicdesign Mini Recorder this month. The Component to generic $35 converter to HDMI I couldn't tell any difference. (just tried it out today) Since HDMI all versions handle 720p though you don't need newer equipment and cables this is to support 1080p... not that the JVC does 1080p... so it means it seems any generic HDMI cables and converter seem to work find in my 2 hour test.
Also just a side note, with my new used Fujinon 17x (pre hd model though I think the glass is 99% as good) I can have my edge enhancement OFF and at the lens's worst looks better than the Fujinon 16x stock lens at it's best.. which as you can guess meant that the HDV looked really close to the live footage due the encoder not compressing the sharpening artifacts. Will be interesting to see what is possible in post from a live capture of JVC ProHD 1xx, 2xx to component to HDMI or preferred built in HD-SDI to 220mbs ProRes. Oh and I have no idea what bit depth my ETEK CITY YPbPr to HDMI $35 amazon.com special does.. but it's a cheap test. |
All times are GMT -6. The time now is 03:32 AM. |
DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network