DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Panasonic P2HD / DVCPRO HD Camcorders (https://www.dvinfo.net/forum/panasonic-p2hd-dvcpro-hd-camcorders/)
-   -   HPX500 & Adobe OnLocation CS3 (https://www.dvinfo.net/forum/panasonic-p2hd-dvcpro-hd-camcorders/133624-hpx500-adobe-onlocation-cs3.html)

William Reliford September 19th, 2008 02:30 PM

HPX500 & Adobe OnLocation CS3
 
Has anyone tried to use Adobe's Onlocation CS3 with the HPX500? Onlocation uses the IEEE1394 interface but the HPX500 does not output video through its 1394 interface (only data). Correct me if I am wrong here.

William

Tim Polster September 19th, 2008 04:38 PM

As far as I know, your should get the full 4:2:2 out of the firewire port except the Pn modes.

Bob Woodhead September 19th, 2008 05:31 PM

What Tim said. I use Scopebox on the Mac (same concept) and all modes except PN work.

Dick Campbell September 22nd, 2008 08:08 AM

I don't know about the 500, but the 200 has a 1394 "device" mode, and a 1394 "host" mode. The host mode writes directly to a 1394 HDD, so I would expect you need to be in "device" mode.

David Cleverly September 30th, 2008 04:35 PM

I am interested in this, too, because I want to run a Firestore off the firewire port for recording DV files as I shoot. Some claim the only hard drive to work is the Firestore FS-100, but I feel this is the case ONLY if you want DVCPRO50 and DVCPRO50HD files to be sent out and recorded from the firewire. I will be happy with straight DV SD files.

Pardon my ignorance, but what is "PN" mode?

Cheers,

David

David Cleverly October 1st, 2008 07:05 AM

Well, after getting my 502 today, I can say that the HPX502 can play out of its firewire connector in real time and capture that playout in real time in Final Cut Pro. This is AS WELL as a simple file import from the camera.

So the answer is, yes, video can be played out of the firewire port.

And, by the way, isn't the video coming out of the firewire port SUPPOSED to be data?????

William Reliford October 20th, 2008 08:03 PM

Quote:

Originally Posted by David Cleverly (Post 945497)
Well, after getting my 502 today, I can say that the HPX502 can play out of its firewire connector in real time and capture that playout in real time in Final Cut Pro. This is AS WELL as a simple file import from the camera.

So the answer is, yes, video can be played out of the firewire port.

And, by the way, isn't the video coming out of the firewire port SUPPOSED to be data?????

David,

Were you in device mode when you captured video directly from your 1394 port? I am still having problems seeing the video.

Christian Magnussen October 21st, 2008 10:38 AM

Quote:

Originally Posted by Tim Polster (Post 939761)
As far as I know, your should get the full 4:2:2 out of the firewire port except the Pn modes.

Someone please correct me if I'm wrong...

But full uncompressed HD 4:2:2 1080i, ain't that way beyond what FW400 are capable of, HD-SDI territory?

Shawn Kessler October 27th, 2008 01:43 PM

Adobe onlocation
 
Has anybody used this program with a macbook pro. just wondering if there was any problems with it before I purchase.

thanks shawn

Dick Campbell October 28th, 2008 06:32 AM

On Location is a Windows only program. You would have to have Bootcamp or somesuch. Scope Box is the Mac alternative.


All times are GMT -6. The time now is 08:44 AM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2021 The Digital Video Information Network