DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Panasonic P2HD / DVCPRO HD Camcorders (https://www.dvinfo.net/forum/panasonic-p2hd-dvcpro-hd-camcorders/)
-   -   Help! Can't access DVCPRO HD clips! (https://www.dvinfo.net/forum/panasonic-p2hd-dvcpro-hd-camcorders/494867-help-cant-access-dvcpro-hd-clips.html)

Ali Jafri April 20th, 2011 05:49 PM

Help! Can't access DVCPRO HD clips!
 
Hi folks, I'm currently doing an edit where I have to incorporate footage I've gotten from an unknown source. I've tried everything to access these clips but none of the software I have will recognize the format. Analyzing the footage with MediaInfo tells me that its DVCPRO HD, but that doesn't help me much.

I'm using a PC and Sony Vegas Pro 10 to make the edits. I also have Premiere Pro CS5 and Media Encoder CS5 but none of these editors will accept the format. Do I need a particular codec? If so then which? And where would I find it? I just need to transcode this to a format which I can use. I need to do this urgently so any help would be most welcome.

This is what MediaInfo says about the clips:

Format : DV
Format_Commercial_IfAny : DVCPRO HD
Duration : 1mn 5s
Bit rate mode : Variable
Bit rate : 107 Mbps
Maximum bit rate : 97.7 Mbps
Width : 1 280 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 29.970 fps
Standard : NTSC
Chroma subsampling : 4:2:2
Bit depth : 10 bits
Scan type : Interlaced
Compression mode : Lossy
Bits/(Pixel*Frame) : 2.593
Stream size : 842 MiB (93%)

Sanjin Svajger April 21st, 2011 07:52 AM

Re: Help! Can't access DVCPRO HD clips!
 
MC5 and PP5 should both support DVCproHD... I edit DVCproHD from my HPX171 all the time with out any problem (with MC5). In what container are the files? MXF, MOV?

Ali Jafri April 21st, 2011 08:56 AM

Re: Help! Can't access DVCPRO HD clips!
 
the clips are MXF. Yes they should be recognized by the software I have. Do you think the clips could possibly have been corrupted somehow? Just a theory.

David Settlemoir April 21st, 2011 09:13 AM

Re: Help! Can't access DVCPRO HD clips!
 
Sony Vegas doesn't edit DVCPRO HD natively. You have to purchase Raylight.

Raylight by DVFilm - Edit HVX200 DVCPROHD with Vegas or Premiere

Sanjin Svajger April 21st, 2011 03:02 PM

Re: Help! Can't access DVCPRO HD clips!
 
Try downloading this and see if it helps...

Calibrated{Q} DVCProHD Decode Overview

Sanjin Svajger April 21st, 2011 03:06 PM

Re: Help! Can't access DVCPRO HD clips!
 
Quote:

Originally Posted by Ali Jafri (Post 1641517)
the clips are MXF. Do you think the clips could possibly have been corrupted somehow? Just a theory.

You say the clips are in MXF so that would suggest that they are in the original state. So I doubt that there's something wrong with the clips it self... But who knows...


All times are GMT -6. The time now is 09:01 PM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network