DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Photon Management (https://www.dvinfo.net/forum/photon-management/)
-   -   Wet pavement..how? (https://www.dvinfo.net/forum/photon-management/497218-wet-pavement-how.html)

Warren Kawamoto June 15th, 2011 01:39 PM

Wet pavement..how?
 
You've all seen commercials and films where the entire street or parking lot appears wet and glossy. How is this done? I'm guessing that water evaporates too quickly to get the entire street evenly. Do they use some kind of glycerin or glycol? A really good example of this was in "X-Men, First Class" when they went to the third floor parking garage. The entire floor looked like it was coated with some kind of glossy liquid plastic.

Liam Hall June 15th, 2011 04:48 PM

Re: Wet pavement..how?
 
There's no secret sauce here, just a water bowser and bit of backlighting. Simple really.

David W. Jones June 15th, 2011 05:09 PM

Re: Wet pavement..how?
 
Water truck.

Ian Dart June 15th, 2011 07:47 PM

Re: Wet pavement..how?
 
connect a hose to a tap (faucet).
hold free end of hose.
turn on tap (faucet).
wave around the hose when the water comes out.
repeat when evaporation occurs.

Chris Medico June 15th, 2011 08:12 PM

Re: Wet pavement..how?
 
Quote:

Originally Posted by Warren Kawamoto (Post 1658681)
You've all seen commercials and films where the entire street or parking lot appears wet and glossy. How is this done? I'm guessing that water evaporates too quickly to get the entire street evenly. Do they use some kind of glycerin or glycol? A really good example of this was in "X-Men, First Class" when they went to the third floor parking garage. The entire floor looked like it was coated with some kind of glossy liquid plastic.

You can't use anything like glycerin. You will create a high risk for slips and falls.

The answer is to use a water truck that can wet the entire street down in a quick pass. When it starts to dry off enough you send them back for another pass. Depending on the weather you may have to wet it down every 15 minutes.

If its a small space you can do it with a garden hose. Otherwise you really need a water truck with a boom sprayer on the back.

Gary Nattrass June 16th, 2011 01:06 AM

Re: Wet pavement..how?
 
Yup as said it's a simple as a water truck (or a friendly local fire truck for hire) and wet it before you do some takes, you also need to light the water so it shines.

This also goes for rain effects, the key is to back light the water so it shows up on screen.

Brian Drysdale June 16th, 2011 01:14 AM

Re: Wet pavement..how?
 
Our fire brigade connected up a fire hydrant and supplied a fire hose for creating a rain effect on one production I worked on. It would work equally well for wetting down a reasonably sized area.

Warren Kawamoto June 16th, 2011 01:15 AM

Re: Wet pavement..how?
 
Thanks guys, but I thought it was something more complicated than that because all the scenes I've seen don't have puddles or dry spots. Everything is evenly and completely uniform in dampness, something I haven't been able to replicate when doing a large area with just water.

Chris Medico June 16th, 2011 03:25 AM

Re: Wet pavement..how?
 
Its really no magic to it other than water. You would have crew sweep any puddles to break up those shiny spots.

Other than that it comes down to lighting.


All times are GMT -6. The time now is 01:28 PM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2025 The Digital Video Information Network