Re: Igus DIY Motorized Slider for sale
 

Slider is sold

Sony FS100 w/ A-mount adapter
 

Selling my FS100 after years of good service.
It's in great shape. It comes with the Sony 18-200mm kit zoom and all the standard equipment the camera came with - recharger, power source, cables, etc. I'll also throw in the LA-EA1 A-mount lens adapter. Comes with 3 batteries: Sony NP-F970, F770 and a Pearstone F770.
Total operating hours is only 270 hrs.
Asking $3,200. S/H is $30. Email Glen at vanvideo@aol.com or call me at 904-955-0899. Thank you!

I shot these videos with the camera, as an example:

https://vimeo.com/53582050#at=0

Re: Canon 5d Mark 2, with accessories
 

I see I went a little too expensive for comparable cameras for sale.
Both still have the grip, Magic Lantern installed, batteries, charger, and at least one 32GB Transcend CF card

$1200 for camera with 25,000 clicks
$1150 for serviced camera with 75,000 clicks,

OR $2250 for both. If you buy both, you get a total of six 32GB CF cards (transcend)

contact me at Robert@rnbweddings.com

Re: Lamps / Porta Brace Carry On ENG Camera Bag
 

lamps sold

----

Dimensions for porta brace:

Internal Dimensions: 26" Long x 6" Wide (not including viewfinder "pocket" or the two side pouches) x 7" - 10" Tall (shortest at the front, tallest near the middle)

External Dimensions: 28" L x 12" W (including viewfinder & pockets) x 12" T (at tallest point)

Weight w/ strap: 5lb

JuicedLink RA333 Riggy Assist Low-Noise Preamp - Asking $375 shipped
 

I am selling a barely used JuicedLink RA333 Riggy Assist Low-Noise Preamp. I am including a RB401 Riggy Bracket. The Riggy bracket adapts additional accessories such as a wireless and shockmount to four 1/4-20 screw fittings.

All that's missing are the cork protection strips for mounting to the bottom of a DSLR. Asking $375 shipped. I accept Paypal. Email me at jim@jmnproductions.com. Thanks for looking.

Sony HXR-MC1 POV Camera
 

Headline says it... Camera is in perfect functioning condition, although it has some wear from use. Glass is flawless.

Comes with the full accessory set which includes 2 batteries, the AC adapter, the LANC remote, carry bag/case, wide angle adapter and a 32GB Sony Memory Stick Pro Duo card. Selling because it's just not being used much anymore. My clients have discovered what I can do with a DSLR and that's what's now required of me (which also makes hiding cameras on stage a lot harder). I've been using it for a couple years for shooting classical and jazz music performances.

In the pictures, you'll see a couple nicks in the screen. They are not actually in the screen, but rather in a screen protector. They don't affect a thing.

Ideally, I'd like $850 for the full rig. Would consider trades under the right situation for Canon DSLR gear (I'm running a 7D and a 60D right now).

--Ben

Re: Sony HVR-V1U for sale
 

Here are some pictures of Sony HVR-V1U

MTF Nikon to 1/3" Bayonet Adapter - MINT
 

I have a MINT*MTF Nikon to 1/3 bayonet adapter for JVC, Sony, and Panasonic 1/3" camcorders. Never used and and in MINT condition. Here's your chance to put Nikon F still lenses on your 1/3" camcorder. Retails for $315 but I let it go for $175 shipped to your door from ZIP 20002.

https://www.lensadaptor.com/nikon-13-bayonet-adaptor

Let me know if you have questions: giganova@giganova.com

Re: JuicedLink RA333 Riggy Assist Low-Noise Preamp - Asking $375 shipped
 

Price lowered to $350 or best offer.

Re: JuicedLink RA333 Riggy Assist Low-Noise Preamp - Asking $375 shipped
 

Jim, feel free to donate the beachtek to my college program if it doesn't sell ;-)

For those unfamiliar with available materials, if I were to buy this under-camera mixer I would swing by my local auto parts store for sheet gasket material. This is available in rubber and rubberized cork about 1/16" thick, either would be fine when cut to size and contact-cemented (rubber cement) to the top of of the mixer.

If that wasn't enough thickness to prevent the camera screw from bottoming out in the tripod socket, I'd use a double layer.

Cost ya' $4 USD plus some glue...

Re: Canon 60D, 50mm 1.4
 

still for sale!

Re: JuicedLink RA333 Riggy Assist Low-Noise Preamp - Asking $375 shipped
 

Thanks, Seth - great suggestion.

Just to be clear, it is a JuicedLink and not a Beachtek product. - Jim

Re: JuicedLink RA333 Riggy Assist Low-Noise Preamp - Asking $375 shipped
 

That's a nice looking unit. The JuicedLinks have really low noise.

To put something between, say, it and something else, what I use is a small pad of anti-skid shelf or drawer liner, similar to this: anti-slip shelf liner,drawer liner wholesale

It is only about a millimeter or so thick but when the two parts are tightened together it squishes down into nearly the thickness of a couple sheets of paper, and .... nothing slips!

No glue required and it doesn't leave any marks. In fact, it really protects the adjacent surfaces.

Re: Sony FS100 w/ A-mount adapter
 

Now $2,800.

Re: Sachtler Hot Pod Tripod Aluminium 100mm
 

Ugg, if I wasn't so committed to spending 300 million on new cameras this years, it's exactly what I was looking for.