Re: X70 Full PP Color Correction settings
 

Meant to tick UNLISTED. Uploaded a 4K test clip with the new profile.......I didn't color correct it at all, or grade it, this is right out of the camera shot under those ugly weird green/blue/cyan street light. I hate those things!

Re: X70 Full PP Color Correction settings
 

Hi Paul, Your video won't upload.......

Re: X70 Full PP Color Correction settings
 

Which one are you trying to playback? It might have been switched to private, let me reenable it for playback.

Paul

Re: X70 Full PP Color Correction settings
 

The last one you posted above. ^^

Re: X70 Full PP Color Correction settings
 

Unlocked :-)

Re: X70 Full PP Color Correction settings
 

Thanks. Working now.

Re: X70 Full PP Color Correction settings
 

FEBRUARY 2020 UPDATE

New REC709 Picture Profile I created using my new vectorscope and DSC Camalign chart. Settings used for this video are below. Feel free to modify the black gamma and saturation to your liking. -6 black level sets the black to actual 0IRE on the waveform. (was shot on Z90, but settings are cross compatible with the X70 and Z150)

BLACK LEVEL: -6

GAMMA: ITU709

BLACK GAMMA: HIGH 0

KNEE: MANUAL 87.5%, SLOPE -2

COLOR MODE: ITU709 MATRIX

SATURATION: 0

COLOR PHASE: 0

COLOR DEPTH: R+3, G+3, B+2, C+2, M+3, Y+3

COLOR CORRECTION: COLOR REVISION

MEMORY SELECTION: 1&2

MEMORY1 COLOR: 15, 6, 0

MEMORY1 REVISION: -6, 0

MEMORY2 COLOR: 0, 9, 0

MEMORY2 REVISION: +4, -1

WHITE BALANCE SHIFT: 0, 0, 0, 0

DETAIL LEVEL: 0

MANUAL SET: ON

V/H BALANCE: 0

B/W BALANCE: TYPE1

LIMIT: 7

CRISPENING: 0

HI-LIGHT DETAIL: 0

Re: X70 Full PP Color Correction settings
 

Thank you,
is long time,i tested lot of profiles. But for me is best not touch any color correction. X70 in default color is lot of neutral with cold white balance. So my setting give me more saturation and white balance is go to warm color. All colors looks good on colorchecker. No used any calibration utilities.Try it ifyou want.

BLACK LEVEL: -3
GAMMA: ITU709
BLACK GAMMA: HIGH 0
KNEE: MANUAL 87.5%, SLOPE -2
COLOR MODE: ITU709 MATRIX
SATURATION: +5
COLOR PHASE: 0
COLOR DEPTH: 0, 0, 0, 0, 0, 0
COLOR CORRECTION: OFF
WHITE BALANCE SHIFT: LB-CC, +3, 0, 0, 0
DETAIL LEVEL: +3
MANUAL SET: ON
V/H BALANCE: 0
B/W BALANCE: TYPE1
LIMIT: 7
CRISPENING: 0
HI-LIGHT DETAIL: 0

Re: X70 Full PP Color Correction settings
 

Those videos must have gone to "private" again.

Andrew