DV Info Net
Page 2 of 7 1 2 34567
Show 40 post(s) from this thread on one page

DV Info Net (https://www.dvinfo.net/forum/)
-   Sony 4K Ultra HD Handhelds (https://www.dvinfo.net/forum/sony-4k-ultra-hd-handhelds/)
-   -   AX100 Firmware 3.0 is out today!! (https://www.dvinfo.net/forum/sony-4k-ultra-hd-handhelds/527252-ax100-firmware-3-0-out-today.html)

Noa Put March 13th, 2015 12:56 PM
Re: AX100 Firmware 3.0 is out today!!
 
Quote:
Originally Posted by David Arendt (Post 1879477)
Is the HDMI port still only enabled during recording of 1080i/p or is it now also enabled while recording 4K ?
Where do I find that info back in the menu?

David Arendt March 13th, 2015 01:05 PM
Re: AX100 Firmware 3.0 is out today!!
 
In fact this info cannot be found in the menu. The only way to determine this is to connect the camcorder to a televsion and see if there is still an image displayed on it while recording.

Noa Put March 13th, 2015 01:11 PM
Re: AX100 Firmware 3.0 is out today!!
 
Ok, so it's not the "hdmi resolution" in the menu, that one does display from 720p to 2160p as selection? Not sure if I can find my hdmi cable but if I do I"ll try

Jeff Harper March 13th, 2015 01:12 PM
Re: AX100 Firmware 3.0 is out today!!
 
Anyone know how to get rid of the Zoom buttons on the screen that now appear after the update?

They are distracting and I can't find a setting to turn them off.

David Arendt March 13th, 2015 01:14 PM
Re: AX100 Firmware 3.0 is out today!!
 
No, the menu entries are always available. Only a black image is outputted via hdmi during recording 4k on older firmwares.

Noa Put March 13th, 2015 01:20 PM
Re: AX100 Firmware 3.0 is out today!!
 
Quote:
Originally Posted by Jeff Harper (Post 1879492)
Anyone know how to get rid of the Zoom buttons on the screen that now appear after the update?

They are distracting and I can't find a setting to turn them off.
menu, camera/mic, camera data display -> set to "on"

Noa Put March 13th, 2015 01:24 PM
Re: AX100 Firmware 3.0 is out today!!
 
Quote:
Originally Posted by David Arendt (Post 1879494)
No, the menu entries are always available. Only a black image is outputted via hdmi during recording 4k on older firmwares.

Just connected the camera to my tv with a hdmi cable and got an image in standby mode, as soon as I pressed record my tv turned black.

Noa Put March 13th, 2015 01:25 PM
Re: AX100 Firmware 3.0 is out today!!
 
oh wait, my camera is set to 4k and the tv is 1080p, I take it I should set the camera to 1080p first?

Jeff Harper March 13th, 2015 01:26 PM
Re: AX100 Firmware 3.0 is out today!!
 
Noa, that setting is on by default. These zoom buttons are driving me crazy. The come on over top of the screen and I can tap the screen to get rid of it. but then they come right back.

Noa Put March 13th, 2015 01:27 PM
Re: AX100 Firmware 3.0 is out today!!
 
Just set the camera to 1080p and connected back to the tv, now I continued having a preview on my tv when the camera was recording...

Noa Put March 13th, 2015 01:29 PM
Re: AX100 Firmware 3.0 is out today!!
 
Quote:
Originally Posted by Jeff Harper (Post 1879499)
Noa, that setting is on by default. These zoom buttons are driving me crazy. The come on over top of the screen and I can tap the screen to get rid of it. but then they come right back.
have you configured your buttons true camera/mic and then mybutton?

Noa Put March 13th, 2015 01:30 PM
Re: AX100 Firmware 3.0 is out today!!
 
Sorry, wrong setting! try setup, display setting and set this to on

David Arendt March 13th, 2015 01:36 PM
Re: AX100 Firmware 3.0 is out today!!
 
As you are from Belgium, I suppose you installed the update on the pal model right ? So is it also perfoming correctly on the PAL model and offering 25/50fps ?

Jeff Harper March 13th, 2015 01:50 PM
Re: AX100 Firmware 3.0 is out today!!
 
Noa, thanks much! That was it!

Noa Put March 13th, 2015 01:53 PM
Re: AX100 Firmware 3.0 is out today!!
 
Quote:
Originally Posted by David Arendt (Post 1879504)
As you are from Belgium, I suppose you installed the update on the pal model right ? So is it also perfoming correctly on the PAL model and offering 25/50fps ?
Yes, it's a pal model and when viewing the menu I get 25p and 50p options in xavc s hd and 25p in 4K


All times are GMT -6. The time now is 10:37 PM.
Page 2 of 7 1 2 34567
Show 40 post(s) from this thread on one page

DV Info Net -- Real Names, Real People, Real Info!
1998-2025 The Digital Video Information Network