DV Info Net - Z7U error?

DV Info Net (https://www.dvinfo.net/forum/)

- Sony HVR-Z7 / HVR-S270 (https://www.dvinfo.net/forum/sony-hvr-z7-hvr-s270/)

- - Z7U error? (https://www.dvinfo.net/forum/sony-hvr-z7-hvr-s270/134734-z7u-error.html)

Anyone know what "E:61:30" on the top right of the screen means? I had my memory recorder disconnected, turned the camera on with a DV tape and was setting up for a SD shoot and this error message was seen, when I powered down, hooked the memory unit back up and restarted the flashing E:61:30 disappeared and showed my actual tape meter.

Could not find anything online about this. I was thinking perhaps it was because I started it w/o the memory recorder on the camera and had it set up to use it previously?

Not a huge deal, I was just wondering if anyone knew what that error meant.

-Scott Caplan
Triad 3 Media, LLC

Contact your sony service centre and inform them of the 5 digit code starting with E:

thats straight from the manual

The error code E6130 means: reset position detect error when stepper iris is initialized.

I guess you better contact your Sony dealer.

I have the same problem on my Z5, and the iris ring does not work at all!

Did you figure out what to do?

I am going to call Sony in the morning