software update
I saw there's a software update for the NX3. It looks like it adds recording/playback/output in XAVC S HD format at 50mbs.
Anyone here updated? What's your experience? |
Re: software update
Yes, there is a new Software: HXR-NX3 : Binary Package V2.00
NEW FEATURES 1.) Recording/playback/output in XAVC S HD format. 2.) HDMI REC CONTROL 3.) Operation stability improvement |
Re: software update
Here's a link for the NX3 software update. Software: HXR-NX3 : Binary Package V2.00 (Win + Mac) : Software/Drivers : Bulgaria : Sony Professional
|
Re: software update
I did the update yesterday, and it went well. You have to update without a card in the camera, which is something not immediately obvious in the instructions. You also can't update when powering from a battery - you must have the camera connected to AC power.
I just shot a few quick test shots in the new codec today. It's significantly better at capturing detail, as I would expect. I am not using an external recorder, so I don't much care about the HDMI trigger function, although it's nice to know it's there now. Oh, and one more thing... You apparently can't shoot S&Q in the new codec... Bummer. |
Re: software update
I found this step-by-step instruction page very helpful and more complete than the instructions with the app.
https://pro.sony.com/bbsccms/assets/...0_manual_e.pdf |
Re: software update
I have just update my firmware as well to version 2 the main thing i noticed i was recording in AVCHD and getting 352 minutes on a 64gig card did the update and now shows 151 minutes per card, tried getting onto Sony site to find out file recording size but link does not open just sits there got no problem with recording times just keep changing cards just curious on all specifications on changes after update.
|
Re: software update
The XAVC S codec records at 50 Mb (Megabits)/sec. The FX quality AVCHD codec records at 24 Mb/sec. So, it's just slightly more than twice the bitrate, and so that's borne out in the number of available minutes showing on your media.
|
Re: software update
Hi Eric, with the latest update do you know if the NX3 support SD cards over 64gig I was thinking of purchasing some 128gig cards if comparable.
|
Re: software update
I'm using two 128 GB SDXC cards in the camera, so yes. :)
|
Re: software update
Thanks Eric for that information just ordered 2 x SanDisk 128GB Extreme Pro UHS-I SDXC from B and H today it is cheaper for me to purchase from them even with Aussie dollar and PayPal charges I get only 70c in the dollar at the moment total cost $175AU for both cards including freight from America, to buy here in Australia $220 each plus $15 freight for exactly the same items total $455.00 ridiculous mark-up
|
Re: software update
Quote:
|
Re: software update
The camera is always 8-bit. The HDMI output is uncompressed 4:2:2 8-bit. The internal codecs are always 4:2:0 8-bit.
|
Re: software update
I always use the sony content management utility (version 2.1.00.05171) to import my footage from this camcorder. With AVCHD this was no problem but the XAVC S footage is not recognized?
How can I fix this? |
Re: software update
With the file structure in XAVC S, you don't need to bridge any clips - everything is together in a single MP4 file from when you hit start to when you hit stop. So, just use the raw files, and you'll be fine.
|
Re: software update
but the software doesn't recognize the XAVC S format? It doesn't show anything from my SD card.
|
Re: software update
I'd be surprised if it does. The software predates that format. They don't update it, because people don't need it anymore.
|
Re: software update
if I understand correctly is that sony content management utily doesn't support the XAVC S codec to import.
Now I have downloaded a trial (30 days) from sony content browser verson 2.4.1 When richt clicking on a filder I choose import and I have choosen a XAVC S file (copied this before with copy past in window to pc) but when I try that I get "failed to import the clip" On my Sd card I recorded some original XAVC S footage but I can't import this? I can't select import when right clicking this. So how can I import XAVC S footage so I can edit this in sony vegas pro 13? |
Re: software update
Vegas Pro is on version 15. Perhaps you just need to upgrade? I don't use Vegas, so I couldn't tell you, but there seems to be a fair bit of chatter about this issue on Google - check around.
|
Re: software update
After long searching I have found sony catalyst browse which recognizes my XAVC S footage.
I can transcode to AVC/AAC (MP4), XAVC intra, XAVC long, XAVC S , XDCAM. I also updated my graphic card + drivers because every first time I start vegas and go to full screen it crashes. But now the strange thing is: the original XAVC S files are recognized by sony veas pro!! I don't know if the graphics card update can solved this problem?? |
Re: software update
Doubtful... What probably happened was that when you installed the new version of Catalyst Browse, it installed the newer codec, which is now available to Vegas. In any case, good news!
|
Re: software update
just closed my vegas and restarted it for testing (not pc restart). The XAVC S files are now NOT recognized. Dam, I'm lost now. what's causing this?
|
Re: software update
upgraded to vegas pro 15 and the XAVC s is no problem more:)
But which is the best export setting I choose in sony catalyst browse? I choose the XAVC S 1920x1080 50p 50 Mbps. The original footage was about 30min and it took about 1 hour to export this file! (also choose the optimize expoding speed) Or is this normal? |
Re: software update
oh wait. It seems that sony vegas15 recognize the footage in 1 piece. With AVCHD the footage was cutted in pieces for every 20 minutes. This seems not the point with the XAVC S (mp4) codec.
|
All times are GMT -6. The time now is 08:37 AM. |
DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network