DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Sony VX2100 / PD170 / PDX10 Companion (https://www.dvinfo.net/forum/sony-vx2100-pd170-pdx10-companion/)
-   -   Turn off standby on VX2100 (https://www.dvinfo.net/forum/sony-vx2100-pd170-pdx10-companion/487394-turn-off-standby-vx2100.html)

Jaime Espiritu November 12th, 2010 07:42 AM

Turn off standby on VX2100
 
Hello, Everyone

I'm using my VX2100 for a live event recording to a computer. Does anyone know how to turn off the standby function? In a test situation, I want to record then the camera goes into standby in a few minutes.

How can I turn that off?


Thanks!

Scott Frick November 12th, 2010 08:13 AM

Vx2100
 
Are you using your fire wire cable to output the signal to the laptop? I remember someone saying that you have to leave the tape out of the camera to prevent it from going into standby mode.

Mike Rehmus November 12th, 2010 10:19 AM

Keeping a VX2100 on
 
Leave the tape door open IIRC. Cover the opening with cling wrap if the environment is dusty.

Jaime Espiritu November 12th, 2010 03:45 PM

Turn off standby on VX2100
 
Thanks, Everyone

I took the tape out (My fault) to solve the standby problem while recording to a laptop.

I have one more question...

When recording in live mode, how can I get rid of the flashing tape indicator on the screen?

I turned off the demo mode. Is there anything else in the menu I should turn off?

BTW...This is my first live event so this is why I have so many questions....Thanks...

Jay West November 12th, 2010 11:24 PM

The flashing tape indicator does not get fed out via the firewire unless you have gone into the menu and told the VX to feed out all screen indicators.. I always just ignored it.


All times are GMT -6. The time now is 05:50 AM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2020 The Digital Video Information Network