DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Sony XDCAM EX Pro Handhelds (https://www.dvinfo.net/forum/sony-xdcam-ex-pro-handhelds/)
-   -   Rain/weather cover for the EX3. (https://www.dvinfo.net/forum/sony-xdcam-ex-pro-handhelds/135674-rain-weather-cover-ex3.html)

Kenny Cowburn November 21st, 2008 03:28 PM

Funny thing that,

When I found that rain slicker in the Indi kit website, they were advertising it for the ex3 and seem to have changed that????

The one from porta brace looks pretty good, but fairly pricey

the search continues

Larry Huntington November 21st, 2008 11:41 PM

I'm going to purchase this soon. When I get it, I will report.

Kenny Cowburn December 9th, 2008 05:46 AM

Quote:

Originally Posted by Jay Gladwell (Post 963606)
Here is the PortaBrace rainslicker. It does appear to be "custom" made for the EX3. And it's considerably cheaper than the body armor.

PortaBrace - Product Detail:RS-EX3

Also, you need to realize that the viewfinder on the EX3 is considerably larger than the one on the XL2. I had an XL2 and a PB rainslicker. The XL2 rainslicker will NOT fit on the EX3 because the of the difference in size. I tried it. It didn't work.

Thanks Jay, you saved me making a mistake on that one.

Just recieved the CC-11 from KATA and it fits like a glove (even with the cheekpad flapped out) and hardly hampers the operation at all, although itīs a bit of a mission to get the thing on.

just bummed I canīt see the viewfinder settings from outside the slicker, a clear window(openable/velcro) would be great for that.

at 93 €īs, also quite a bit cheaper than the porta brace one

Ian Planchon December 9th, 2008 08:20 AM

I have always used porta brace, so I picked up the rain slicker for my ex3....its pretty sweet, fits like it should, even with the anton bauer battery on there.

with the wide eye on, it is a little large, so you have to make sure its cinched down everywhere so the front doesnt slide over the lens and start getting in the shot, but thats pretty easy to avoid.

I was also a little bummed that they used velcro underneath, instead of a zipper like I had on the cover for my HD100. but there isnt much to worry about on the bottom of the ex3, so its not a HUGE deal.

now I just need some bad weather to test it in!

Terje Rian December 10th, 2008 02:24 PM

I just received a rain cover for my EX-3 from Cine City in India. The build quality seems just fine, but I havenīt tested the product yet. The quality seems similar to the Porta Brace cover I used on my Canon XL2 a few years back. Like everything else in the video world itīs all about preferences, but for me a rain cover is just an option occasionally. Someone who does a lot of nature work would be wise to spend some time to find a more specialized product, I guess.

Here is the web address: The CineCity*::*DV/HDV Rain covers

At least the price is acceptable, and they have quite a few other interesting video accessories as well.

-terje

Mark Twittey December 10th, 2008 02:52 PM

I have just come back from a 2 week shoot on a Ice breaker in the North Sea,
Loads of Snow, rain and wind. Minus 8 celsius most days.
I used a Kata RC-10 with my EX3, it was great.
Yes it's a bit "bagy" in places but I found that ideal, as I use a Mattebox and rails.
Plus when you have wet weather gear on and thick gloves there was plenty of room
underneath the cover to operate the camera.
Plus you can attach a camera strap, which is usefull when having to climb ladders
and stuff!
I can recomend it.

David Issko December 12th, 2008 04:52 PM

I just bought the Kata RC-1 for my EX3 & XS lens combo. Together with the VF Gadgets' base plate and radio mic receiver, the kit is quite long. The RC-1 Gobbles it up with loads of hand/arm room under, in front and behind the cover to access all buttons & controls of the camera. It is big enough to easily accommodate a future Matte Box as well.

The cover has lots of velcro & cord adjustments and the mic cover fits my on camera external ECM-673 with the Rycote Softie and the viewfinder cover fits the eyepiece perfectly.

My camera kit is not going to get smaller, so the RC-1 is the best choice for my requirements.

Alister Chapman December 13th, 2008 03:21 AM

There are some very snug fitting body amour style covers for the EX1 and EX3 coming very soon from Kata. I've seen the prototypes and they are very nice with clever moulded side panels, plenty of openings for easy access etc. They only protect the main camera body or body plus VF on the EX3. I find the CRC-11 works very well with my EX3.

Steven S. Miric December 13th, 2008 07:54 AM

My experience
 
I got a Petrol rain cover last summer for assignment in Amazon Jungle (Ecuador). At the time, there was no dedicated rain covers on the market (at least non of the major brands did not have an EX1 dressed in the rain cover in their catalogs on line- so I could not see how it fits). Let alone, here in Toronto selections "in store" was very small. So I went with Petrol's cover, after trying it on the spot.
This one looked like the best fit. Funny thing is that ALL covers that I saw had the same flaw: opening between the lens and on camera mic??? Yes, a whole!
I was under the impression that I was doing something wrong when dressing the camera, but all the staff in the store did the same.
So I found a "duck tape" solution: a piece of gaffers tape placed properly, closes the gap between the lens and mic.
Cover turned out to be a great help in rainy Amazon. My EX1 came back with out being wet...
Petrol has a good product.


All times are GMT -6. The time now is 12:40 PM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2025 The Digital Video Information Network