help can't find it... camera slide
 

saw a post on a device that attached to the tripod which allowed the camera to slide left ad right
Thought I saved it... can anyone direct me to the post
thx
bob

You need www.glidetrack.com

Try: T-Jib® - T-Slide® in the states.

DIY slider
 

I tried some similar sliders and found the bearing a bit sloppy, and the exposed track surface can get rough easily, and it was expensive - so I sent it back and built my own.
80/20 sells extruded aluminum and parts for linear motion systems. I purchased some 1.5x3 track, a slide with nylon bearing that ride in the side slots (where they are protected from dirt and dents), and a tripod ball adapter and head adapter. All told I think it cost about 200 dollars with the manfrotto parts.
It just required a couple holes to be drilled and one to be tapped for a 3/8 stud ( for the manfrotto ball).
Works better than the 700 dollar job I returned.

Look at LCP Video Camera Slider for Professional Film & Video Production

it's a new slider, I've had one of their test models
for about a month and it has been super.

Think their web site says they will be ready early in 2009

Indislider
 

Bob, I have the Indislider and I am really satisfied with it. See: IndiSYSTEM - Studio 4 Productions

Further Information: Thoughts at 24fps: Snow Motion with the IndiSlider

Best regards,

Eva

Thanks for all the info

Denis do you have a photo of the one you built... curious