DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Tripod Sticks & Heads (https://www.dvinfo.net/forum/tripod-sticks-heads/)
-   -   Bogen 503 Head problem (https://www.dvinfo.net/forum/tripod-sticks-heads/44490-bogen-503-head-problem.html)

Gev Babit May 12th, 2005 09:17 PM

Bogen 503 Head problem
 
I'm having problems with my Bogen 503 fluid head. When I tighten the pan knob to pan there is this jolt when paning to the left. When I pan slowly the small jolt is gone. Is this right? Maybe I am panning too fast when its tight, cause when I loosen it there are no jolts when paning fast. I havent used it much so I dunno why its like that, I can't remeber it being like that when I bought it. Any advice appreciated thanks!

Kevin James May 13th, 2005 09:32 AM

Strange, I just noticed that mine is acting funny with the pan drag tightened way up as well. It sticks at the beginning of a right pan. It'll be ok for a few starts after that but will stick again after sitting for a few minutes.

Richard Lewis May 13th, 2005 10:36 AM

If you are using a bowl head, make sure the 503 is properly secured to the bowl. Make sure all the screws are tight, as the head may be slipping.

I had this problem with the tilt, so I sent it away to service. Not had any issues since.

Gev Babit May 13th, 2005 11:39 AM

Richard,
I just tightend the bowl screws and the jolt is GONE!
Thanks so much!!

Kevin,
Try tightening the 3 bowl screws, it worked for me!

Richard Lewis May 13th, 2005 05:15 PM

No problem Gev, I'm glad you’ve got it sorted.


All times are GMT -6. The time now is 06:23 AM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network