DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Wedding / Event Videography Techniques (https://www.dvinfo.net/forum/wedding-event-videography-techniques/)
-   -   Audio backup device ... not iRiver (https://www.dvinfo.net/forum/wedding-event-videography-techniques/102795-audio-backup-device-not-iriver.html)

Michael Liebergot September 5th, 2007 02:21 PM

Vito, I'll post a review of it (that I posted in another forum) in the audio forum for you and everyone.

Vito DeFilippo September 5th, 2007 02:25 PM

Great! Thanks a lot.

Michael Liebergot September 5th, 2007 02:43 PM

Vito, initial review of the NEW Zoom H2 recorder is now posted in the All Things Audio Forum.

http://www.dvinfo.net/conf/showthread.php?t=102919

Steven Davis September 5th, 2007 03:10 PM

I went to the store this past weekend and did a touchy feely with a http://www.samsontech.com/products/p...fm?prodID=1916 but the only thing that concerned me was no lock button. It was small enough to go in a groom's pocket, as well as the external mic was nice, the price wasn't too bad.

Michael Liebergot September 5th, 2007 03:27 PM

Quote:

Originally Posted by Steven Davis (Post 739769)
I went to the store this past weekend and did a touchy feely with a http://www.samsontech.com/products/p...fm?prodID=1916 but the only thing that concerned me was no lock button. It was small enough to go in a groom's pocket, as well as the external mic was nice, the price wasn't too bad.

Steven, read my review.
There is a hold function. To enable "Key Hold" mode you simply hold down the "Menu" key for a second or two. This puts teh unit in "Key Hold" mode. Everything is locked except for menu function, (L/M/H) Gain settings, and power. To unlock form "Key Hold" mode simply hold down the "Menu" key to release the H2 from hold mode.

It's the same hold function as the H4.

Rick Steele September 5th, 2007 06:46 PM

Quote:

Originally Posted by Michael Liebergot (Post 739708)
I just love audio (and video) with a passion, and wish that the majority of people out there would take the audio end as serious as they do the video.

I think that's the hardest part of this job. I get entirely different results from one wedding to the next.

I don't really know too many other people with your experience level in this. You're always quick to pioneer the newest audio gizmos to see how they can be adapted to weddings and we all appreciate it Michael.

I'm almost leaning toward the H4 because I know I'll grow into the XLR capabilities down the road.

Michael Liebergot September 6th, 2007 07:38 AM

Quote:

Originally Posted by Rick Steele (Post 739894)
I think that's the hardest part of this job. I get entirely different results from one wedding to the next.

I don't really know too many other people with your experience level in this. You're always quick to pioneer the newest audio gizmos to see how they can be adapted to weddings and we all appreciate it Michael.

I'm almost leaning toward the H4 because I know I'll grow into the XLR capabilities down the road.

Rick thanks for the compliment.
I do seem to have a bit of an addiction to these new small recorders, as they are so versitile as to what you can do with them when filming an event where discretness is the rule at hand.

I am most likely done purchasing unit for a while though, as I am very happy with what I have. And it even looks like I might be picking up a few more H2's and getting rid of my R09's. I love the R09's but for the price point and added flexability of the H2, it's a no brainer. The H2 isn't perfect (as the R09 has better pre amps), but it's good enough for event recording. For important recoding I'll use my R4 and hyper card mics.

For our purposes as event videographers the H4 is a great choice. As having a reliable, affordable, a 2 channel (independantly adjustable), balanced XLR inputs, with 48v phantom power in a small form factor is a great addition to a videographers audio kit.

If I were to make any suggestions to videographers wanting to capture good uncompressed audio, would be to pickup a Zoom H4 (to use with either the onboard mics, or most importantly 2 seperate mics preferably hyper cards). As well as a Zoom H2 for small lav micing, and great built in mic versatility.

Record always at least at 16/48 wav to match your camera, 24/96 even better, and you are set.

Steven Davis September 6th, 2007 07:48 AM

Quote:

Originally Posted by Michael Liebergot (Post 740116)
Rick thanks for the compliment.
I do seem to have a bit of an addiction to these new small recorders, as they are so versitile as to what you can do with them when filming an event where discretness is the rule at hand.

I am most likely done purchasing unit for a while though, as I am very happy with what I have. And it even looks like I might be picking up a few more H2's and getting rid of my R09's. I love the R09's but for the price point and added flexability of the H2, it's a no brainer. The H2 isn't perfect (as the R09 has better pre amps), but it's good enough for event recording. For important recoding I'll use my R4 and hyper card mics.

For our purposes as event videographers the H4 is a great choice. As having a reliable, affordable, a 2 channel (independantly adjustable), balanced XLR inputs, with 48v phantom power in a small form factor is a great addition to a videographers audio kit.

If I were to make any suggestions to videographers wanting to capture good uncompressed audio, would be to pickup a Zoom H4 (to use with either the onboard mics, or most importantly 2 seperate mics preferably hyper cards). As well as a Zoom H2 for small lav micing, and great built in mic versatility.

Record always at least at 16/48 wav to match your camera, 24/96 even better, and you are set.


Hey Michael, have you had issues with the units being turned off accidentally, while in the grooms pocket or otherwise.

Vito DeFilippo September 6th, 2007 07:52 AM

Quote:

Originally Posted by Steven Davis (Post 740122)
Hey Michael, have you had issues with the units being turned off accidentally, while in the grooms pocket or otherwise.

The H4 is a bit large to put in pockets. If you check Michael's review of the H2 in the audio forum, you'll see that the hold issue is covered well there.

Steven Davis September 6th, 2007 08:36 AM

Quote:

Originally Posted by Vito DeFilippo (Post 740125)
The H4 is a bit large to put in pockets. If you check Michael's review of the H2 in the audio forum, you'll see that the hold issue is covered well there.

Hey Vito, I did a scan, do you have a link to the post where the 'hold' issue is covered?

Michael Liebergot September 6th, 2007 08:40 AM

Quote:

Originally Posted by Steven Davis (Post 740149)
Hey Vito, I did a scan, do you have a link to the post where the 'hold' issue is covered?

Steve, look a few posts up and see my reply to your "Hold" function question and the H2.

I also addressed it in my review and answered a hold question that Vito had on that page a swell.

Steven Davis September 6th, 2007 09:07 AM

Quote:

Originally Posted by Michael Liebergot (Post 740152)
Steve, look a few posts up and see my reply to your "Hold" function question and the H2.

I also addressed it in my review and answered a hold question that Vito had on that page a swell.


Thanks Michael, that was good stuff. I'm considering investing in the H2.

Bjorn Wikman September 7th, 2007 09:15 AM

What Lav mics are you using with the H4/H2 when connecting to the groom/minister?

By the way great thread! and ofcourse initial review of the H2.

/Björn

Michael Liebergot September 7th, 2007 10:15 AM

Quote:

Originally Posted by Bjorn Wikman (Post 740843)
What Lav mics are you using with the H4/H2 when connecting to the groom/minister?

By the way great thread! and ofcourse initial review of the H2.

/Björn

Don't use a lav with the H4, as it's too large to use in this manner. That and there is no 1/8 lav input if needed anyway. The H4 is designed for use with 1/4 or XLR mics for field use.

As for the H2, and lav mic will work as long as it has a 1/8 input. I have been using the Giant Squid mics. They are inexpensive and great sounding.

http://www.giant-squid-audio-lab.com/gs/gs-mono1.htm

http://www.giant-squid-audio-lab.com...ocardioid.html

EDIT: Just of note. If you purchase the H2 and would like to use a lav mic, then ake usre that you turn "Mic POwer" to "On", in the menu. Otherwise your lav mic most likely will not work.

Bjorn Wikman September 7th, 2007 02:17 PM

Quote:

Originally Posted by Michael Liebergot (Post 740865)
Don't use a lav with the H4, as it's too large to use in this manner. That and there is no 1/8 lav input if needed anyway. The H4 is designed for use with 1/4 or XLR mics for field use.

As for the H2, and lav mic will work as long as it has a 1/8 input. I have been using the Giant Squid mics. They are inexpensive and great sounding.

http://www.giant-squid-audio-lab.com/gs/gs-mono1.htm

http://www.giant-squid-audio-lab.com...ocardioid.html


Thanks Michael. Seriously considering getting a pair.
/Björn.


All times are GMT -6. The time now is 03:02 AM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2025 The Digital Video Information Network