View Full Version : Rain Covers for GL-2


Mike Cavanaugh
October 24th, 2005, 01:02 PM
Any recommendations on good rain covers for the GL-2? Are there any in the <$100 range that work well to protect the camera while still allowing access to controls?

Trond Saetre
October 24th, 2005, 01:12 PM
PortaBrace makes good rain covers.
www.portabrace.com

The one for the GL2 is called RS-GL2, with MSRP $169.

Jim OMalley
October 24th, 2005, 03:00 PM
I've used the PortaBrace cover in a steady downpour for several hours. The camera stayed nice and dry, no head clogs or other similar problems due to moisture.

Dale Guthormsen
October 24th, 2005, 10:32 PM
I purchased a kata rain cover for my gl2 and it is adequate and costs around 60 dollars, they have them at B&H.


gus

Mike Cavanaugh
October 25th, 2005, 08:24 AM
I purchased a kata rain cover for my gl2 and it is adequate and costs around 60 dollars, they have them at B&H.


gus
Dale,
"Adequate" sounds like a less than stellar endorsement - what are your concerns?

Dale Guthormsen
October 25th, 2005, 11:15 PM
If I were to be picky, the case is perhaps a little tight for my hands to work under,
I shoot with a shoulder rest and a hand on the lens barrell a lot and I use a remote on the handle. problem is how do I protect the monfrotto remote. Guess i find using it kind of awkward. I do not have the opportunity to try others!!

I am not totally confident in the ties that pull it around the lens shroud and the view finder.

I have not used it in heavy rain. I ruined my last cam with water so i am pretty careful about the water issue.

It works fine in damp conditions and more than adequate for dust or sand.

To be fair, I have not given it a tuff test. How do i do that with out risk to my lovely camera!!


gus

Nathaniel McInnes
October 26th, 2005, 01:42 AM
i no this is stupid but i find 2 plastic bags do for one time use. but we only use them in light rain

Mike Cavanaugh
October 27th, 2005, 11:11 AM
I am currently using the plastic bag method with a rubberband securing the hole around the lens and another for the hole for the EVF. I also fashioned a lens hood extension out of black cinefoil to provide a bit more cover over the glass. I'd like to look a bit more professional!

Has anyone tried the Petrol PRC-DV Camera Rain Cover? From our friends at B&H - http://www.bhphotovideo.com/bnh/controller/home?O=productlist&A=details&Q=&sku=236286&is=REG&addedTroughType=search

For $85 it looks pretty good, but before ordering, I'd like to hear some reactions.

Rob Jacobs
October 27th, 2005, 11:45 AM
I used the kata for 3 months in Alaska. Two months of that was in southeast Alaska where they average 150 inches of water a year. Never had a problem, but I was as careful as I could be. The most that ever got inside was a couple minute drops of water on top of the handle. That was with hours of down pour. If it got really bad and I wasn't shooting I just put a garbage bag over the kata and tripod. The way I protected my mikes and lens controller was to put condoms on them and tape the ends. Good Luck

Mike Cavanaugh
October 27th, 2005, 11:47 AM
Lubricated or non? ;-)

Thanks for the input - B&H here I come!