EVF and Nanoflash will this work? at DVinfo.net

Ron Little · September 30th, 2010, 09:01 AM

Ok, so I am looking at the new EVF view finders that are coming out. My question what would be the best way to use one with a Nanoflash? I am using the HDMI connection on the Nano and the EVF also uses HDMI. My logic says go to the Nano first and then to the view finder. Will there be latency in the picture?

Piotr Wozniacki · September 30th, 2010, 09:22 AM

Quote:

Originally Posted by Ron Little

.Will there be latency in the picture?

Yes - but not a deal breaker.

Alister Chapman · September 30th, 2010, 10:10 AM

There is some lag, but it's workable so long as there are no additional delays on the cameras output. The NanoFlash can even add a big "record" bar (only on the output, it is not recorded) across the image so it will be obvious in the EVF that it's recording... or not.

Ron Little · September 30th, 2010, 01:29 PM

Now that is cool!

Ronald Jackson · October 2nd, 2010, 12:02 PM

Quote:

Originally Posted by Alister Chapman

There is some lag, but it's workable so long as there are no additional delays on the cameras output. The NanoFlash can even add a big "record" bar (only on the output, it is not recorded) across the image so it will be obvious in the EVF that it's recording... or not.

That is interesting news to me Alistair. I have a Swit HD-SDI monitor which shows absolutely no viewfinder info ex my XLH1.
How do I get my Nano to add a record bar?

Ron

Dan Keaton · October 2nd, 2010, 09:58 PM

Dear Ronald,

If you are using 1.6.29, you can set Video|Screen Tally to see the Record indicator.

I do not have my nanoFlash handy, I think it is Screen Tally, but it may be another word.

September 30th, 2010, 09:01 AM	#1
Ron Little Major Player Join Date: Feb 2003 Location: Pensacola Fl. Posts: 547	EVF and Nanoflash will this work? Ok, so I am looking at the new EVF view finders that are coming out. My question what would be the best way to use one with a Nanoflash? I am using the HDMI connection on the Nano and the EVF also uses HDMI. My logic says go to the Nano first and then to the view finder. Will there be latency in the picture?

September 30th, 2010, 10:10 AM	#3
Alister Chapman Inner Circle Join Date: Dec 2005 Location: Bracknell, Berkshire, UK Posts: 4,608	There is some lag, but it's workable so long as there are no additional delays on the cameras output. The NanoFlash can even add a big "record" bar (only on the output, it is not recorded) across the image so it will be obvious in the EVF that it's recording... or not. __________________ Alister Chapman, Film-Maker/Stormchaser http://www.xdcam-user.com/alisters-blog/ My XDCAM site and blog. http://www.hurricane-rig.com

October 2nd, 2010, 09:58 PM	#6
Dan Keaton Inner Circle Join Date: Dec 2002 Location: Augusta Georgia Posts: 4,795	Dear Ronald, If you are using 1.6.29, you can set Video\|Screen Tally to see the Record indicator. I do not have my nanoFlash handy, I think it is Screen Tally, but it may be another word. __________________ Dan Keaton Augusta Georgia

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

September 30th, 2010, 01:29 PM	#4
Ron Little Major Player Join Date: Feb 2003 Location: Pensacola Fl. Posts: 547	Now that is cool!