Sub $1000 Timelapse Dolly at

Go Back   DV Info Net > The DV Info Network > Digital Video Industry News

Digital Video Industry News
Events, press releases, bulletins and dispatches from the DV world at large.

Thread Tools Search this Thread
Old July 13th, 2010, 03:10 PM   #1
Regular Crew
Join Date: Feb 2010
Location: Evansville, IN
Posts: 49
Sub $1000 Timelapse Dolly

Just got this messages from Dynamic Perception, LLC

Greetings Aaron,

Thank you for inquiring about Dynamic Perception and our new Timelapse Dolly! We've been working hard to get this initial dolly stage and eventually an entire three axis kit that's easy to assemble and transport into your hands. Our goal is to hit the elusive sub-$2500 mark for a 15-20 pound payload, durable, robust, and low power consumption three axis motion control system.

We're kicking it all off with 'Timelapse Dolly Stage Zero' which will be in the $800 range with accurate speed adjustment (top speed around 25 minutes per 5 feet) and direction motor controller. This dolly will be 4’ or 6’ ready to run and have everything you need to start making great time-lapse dolly moves the second it arrives with cameras 5 to 25 pounds.

Our goal is to provide ever-expanding opportunities, and in light of that the controller that will come with the dolly kit will have the ability to connect to the upcoming open source OpenMoco-based Engine. The engine will support up to four axes of integral control, allowing mixing of DC motors, Steppers, and Servos. Once integrated with the Engine, you'll get full camera-sync capability, shoot-move-shoot, stop-motion, and long-term time-lapse capabilities.

We'll keep you posted on each stage of development. We hope to start shipping the 'Dolly Stage Zero' in July. Once we have secured solid delivery timelines from our suppliers, we will open up the pre-order page. We expect to have all timelines secured within three weeks.

We’ll ship worldwide! =)

All the best,

Jay Burlage

(aka Milapse)

Dynamic Perception LLC
$800 sounds pretty stinkin sweet for the rig. Here's a video of the rig:;fullscreen=1
Aaron Dunlap is offline   Reply With Quote
Old July 13th, 2010, 04:03 PM   #2
Regular Crew
Join Date: Jun 2010
Location: Phoenix, AZ
Posts: 120
Totally kickass. My brother and I are about to start building one of those. He is a fabricator and we are going to get everything machined out and drawn up. I can't wait. Hopefully we can pull off the same quality shown here.
Brandon Barnard is offline   Reply

DV Info Net refers all where-to-buy and where-to-rent questions exclusively to these trusted full line dealers and rental houses...

(800) 223-2500
New York, NY

B&H Photo Video
(866) 521-7381
New York, NY

Texas Media Systems
(512) 440-1400
Austin, TX

Precision Camera
(800) 677-1023
Austin, TX

(800) 323-2325
Mineola, NY

DV Info Net also encourages you to support local businesses and buy from an authorized dealer in your neighborhood.
  You are here: DV Info Net > The DV Info Network > Digital Video Industry News

Thread Tools Search this Thread
Search this Thread:

Advanced Search



All times are GMT -6. The time now is 01:55 PM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2018 The Digital Video Information Network