|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
September 18th, 2010, 02:17 PM
|
#1 |
|
Regular Crew
Join Date: Nov 2007
Location: Vancouver, WA
Posts: 190
|
Shot gun for AX2000
Will this mic fit in the mic holder on the AX2000?
Audio-Technica AT875 Short Condenser Shotgun Microphone AT875R - I can't find the tube size specs? Thanks Ben |
|
|
|
September 19th, 2010, 03:01 AM
|
#2 |
|
Regular Crew
Join Date: Sep 2008
Location: Beersheba, Israel
Posts: 111
|
Audio-Technica's AT875R dimensions: 175.0 mm (6.89") long, 21.0 mm (0.83") diameter.
|
|
|
|
|
September 19th, 2010, 08:02 AM
|
#3 |
|
Regular Crew
Join Date: Nov 2007
Location: Vancouver, WA
Posts: 190
|
Thanks Arkady!
Ben |
|
|
|
|
September 20th, 2010, 08:15 AM
|
#4 |
|
Regular Crew
Join Date: Nov 2007
Location: Vancouver, WA
Posts: 190
|
Has anyone tried mounting this mic in the AX2000 or NXCam?. I measured the distance inside the mic holder and its a close weather this mic will fit, the outter dimmensions of the mic @ 21mm may be to small for the holder.
Thanks for any input Ben |
|
|
|
|
September 21st, 2010, 02:44 PM
|
#5 |
|
Regular Crew
Join Date: May 2008
Location: Charleston WV
Posts: 149
|
I use the Rode NTG-1 Shotgun Mic with my Ax2000, I slipped on a few rubber O rings and it now works perfectly.....
|
|
|
|
|
September 28th, 2010, 02:42 PM
|
#6 |
|
Regular Crew
Join Date: Nov 2007
Location: Vancouver, WA
Posts: 190
|
Thanks David, I ended up getting the AT875 and doing the same thing, works great FWIW.
Ben |
|
|
|
|
| ||||||
|
||||||
|
|
