DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Sony XDCAM EX Pro Handhelds (https://www.dvinfo.net/forum/sony-xdcam-ex-pro-handhelds/)
-   -   PMW 300 V-Lock adapter plate (https://www.dvinfo.net/forum/sony-xdcam-ex-pro-handhelds/525707-pmw-300-v-lock-adapter-plate.html)

Brian Murphy November 12th, 2014 02:12 PM

PMW 300 V-Lock adapter plate
 
Finally a plate for bricks! Just ordered one and will report back on how ell it works as soon as I get it.

DM-Accessories ? BATT-VL-300 V-Lock Battery Mount plate for PMW-300 Cameras

Jack Zhang November 12th, 2014 11:17 PM

Re: PMW 300 V-Lock adapter plate
 
Yes, the plate has a regulating circuit inside to regulate the battery voltage to constant 12V DC voltage!

But everyone knows Sony put a software lock in on that port so that it won't accept voltages higher than 12V. The camera is perfectly capable, but Sony put the lock in place to prevent use of third party batteries.

Brian Murphy November 18th, 2014 04:18 PM

Re: PMW 300 V-Lock adapter plate
 
yeh I know everyone knows.... but when I bought the camera no one knew.

Bill Ward November 19th, 2014 09:14 AM

Re: PMW 300 V-Lock adapter plate
 

Donald Rumsfeld in his new role as Sony Apologist Czar.

David Cleverly October 18th, 2016 06:52 PM

Re: PMW 300 V-Lock adapter plate
 
Did the V-mount battery plate end up working?

Is the restriction that Sony put on the camera only relate to the battery shoe or the power input socket as well?

DC

Christopher Young October 21st, 2016 05:36 AM

Re: PMW 300 V-Lock adapter plate
 
That DM Accessories plate looks just the ticket!

Dave ~

Sony regulated the power input as a 12v input on the 300. The battery slot is designed to take the 14.4 volt rated BP-U series batteries. Run a V Loc plate with a regulated 12v out and Bob's your uncle. You can buy the dedicated Sony plug cables off eBay. The original EX1/3 power supplies were 12v but unlike the 300 the EX1/3 series could take a fully charged V Loc battery at 16v + via a D Tap to dedicated Sony power plug.

Hawk Woods make a dedicated PMW-300 V Loc battery plate with a regulated 12v fly lead and Sony plug. It actually mounts onto the camera via the original battery slot.

VL-P300 | V-Lok Camera Adaptor - Sony PMW300 - 1x Power-Con - Hawk-Woods Ltd

if running off a general Hawk Woods regulated D Tap plate you can use these cables.

Tilta V-Mout /Anton Bauer Battery Mount FS7 Power dc cable For Sony FS7 Camera | eBay

or just change the D Tap plug for a tip and sleeve plug that will fit many of the V Loc plates that have regulated 5v, 7.2v, and 12v outputs. There are V Loc plate kits on eBay that come with a whole range of cables such as:

V mount V lock Battery Power Supply Splitter Plate for DSLR rig 5D2 5D3 7D BMCC | eBay

Chris Young
CYV Productions
Sydney


All times are GMT -6. The time now is 01:38 AM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network