DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   All Things Audio (https://www.dvinfo.net/forum/all-things-audio/)
-   -   Audio in a moving vehicle..? (https://www.dvinfo.net/forum/all-things-audio/237044-audio-moving-vehicle.html)

Terry Lee June 14th, 2009 01:33 PM

Quote:

Originally Posted by Martin Catt (Post 1157970)
I've sat in the back seat with a hypercardioid mic on a four-foot boom going between the two front seats, aimed up toward the driver. Results were quite good, even getting the "normal" operating sounds. I was recording to a MicroTrack digital recorder for later synching.

So would my short condensor sound horrible? See the problem is I understand that it would be way better to use a audio recorder like the Tascam DA-P1 hooked to a boomed-from-below omnidirectional microphone or Lav/Cub1 from the celing but good greif I would be paying out the ass for that convenience and I doubt this short film will hit a film festival. A hypercardioid I don't think would be to expensive but will it make that much of a difference in terms of audio performance in the truck as well as in the public bathroom scene?

I dunno. I still may try to budget a portable recorder. The convenience of having one I think would be way worth it. I would also love to be able to record sounds, like glass breaking etc. that I can edit in in post.

thanks Martin,
Terry.

Karl Lohninger June 14th, 2009 03:51 PM

A omni is really out of place here. A cardiod....well, not the first choice, depends now on camera placement/framing/how close can you go. A hypercardiod would be the right choice.

It's ok to go into the camera - going double system in a way has its own downfalls, be aware of that. It's more important to first invest in one (or more) nice microphones.

Also, microphones keep their value over a very long time, especially if you buy used.

Jonathan Plotkin June 14th, 2009 04:17 PM

Quote:

Originally Posted by Karl Lohninger (Post 1158144)
Onto the ceiling between and slightly in front of them, that's where I put them.

So I looked up the Cub-01 and it shows two polar patterns - a cardioid pattern and a hemisphere pattern. Does it matter which one you use? I assume you would position the "back" of the microphone towards the front window, right? Thanks again!

-JP

Terry Lee June 14th, 2009 04:23 PM

Any old hypercardioid? I've never shopped for hypercardioid microphones before so i'm kinda lost in that department. I found a pretty nice Audio Technica hypercardioid. By nice I mean cheap. Its a Audio Technica AE6100.

Karl Lohninger June 15th, 2009 07:42 AM

Nobody in their right mind would shoot with some 20 dollar clunker VHS (full!) camera flee market find - unless it's for a (very) special effect.

This 'it's nice 'cause it's cheap' thing really is the wrong way to go about. If you like AudioTechnica, the 4000 series is the only acceptable one from them.

If you buy a 'quality' used microphone you can be sure to not lose a dime in case you'd want to sell it again in a few years. Hell, you might even get more. Try that with those cheapies......
Think of Sennheiser MKH series, AKG 460/480 series, Schoeps CMC series (you'll find pretty cheap T-powered Schoepses out there!), and if you really want AT, then the 4000 series.

Terry Lee June 15th, 2009 10:10 AM

Well the Audio Technica AE6100 is $170 on B&H. I paied $200 for my AT875R.

Terry Lee June 15th, 2009 12:48 PM

I see what you are saying Karl. But like I said, i've never shopped for a hypercardioid before. I bought my AT875r short condensor as an all purpose microphone for applications both indoor and out. Bassically my choice was money oriented, as is most purchases of any sort. The AT875r is $200 and was rated a great buy for its class.

I think that AT AE6100 is more for vocals since its a dynamic microphone. See I know nothing about these microphones!!


All times are GMT -6. The time now is 04:22 AM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2025 The Digital Video Information Network