studio 1 xlr-pro ground cable at DVinfo.net

Henry Cho · May 14th, 2005, 09:37 AM

got the unit yesterday, and it looks perfect for what i need... a second pair of xlr ports in addition to my ma-100.

i have a question regarding setup... the ground cable is an rca jack with a pass through. the manual clearly states that the ground cable should be connected to the camera's right audio OUT jack. i have an xl1. the only audio output when in shooting mode is the headphone jack. however, there are two pairs of audio rca-type jacks that are used for audio INS (they turn into OUTS only in vcr mode). do you think running the ground cable into one of the audio INS would be ok? if not, and the ground indeed needs to be connected to an audio OUT, do i simply convert the rca jack to a miniplug? i'd hate to do that and lose my headphone jack.

any help would be greatly appreciated.

Dan Keaton · May 28th, 2005, 08:30 PM

Dear Henry,

I believe that both the Audio and Video jacks are live outputs when you are shooting with an XL1s. I assume that the XL1 is the same.

I would test this for you, but my XL1s is on assignment tonight. You can easily test this by going into camera mode, and connecting the audio and video out to a suitable tv or monitor.

I would follow the instructions, even if the audio out is not enabled on your XL1 it should still be a good ground.

Henry Cho · May 29th, 2005, 10:35 AM

dan,

thank you for your help. unfortunately, i have active video out during shooting on my xl1, but the two sets of audio jacks are INS. i'm running the ground cable through one of the right channel INS, and haven't had any problems... yet.

thanks again...

May 14th, 2005, 09:37 AM	#1
Henry Cho Major Player Join Date: May 2005 Location: NYC Posts: 516	studio 1 xlr-pro ground cable got the unit yesterday, and it looks perfect for what i need... a second pair of xlr ports in addition to my ma-100. i have a question regarding setup... the ground cable is an rca jack with a pass through. the manual clearly states that the ground cable should be connected to the camera's right audio OUT jack. i have an xl1. the only audio output when in shooting mode is the headphone jack. however, there are two pairs of audio rca-type jacks that are used for audio INS (they turn into OUTS only in vcr mode). do you think running the ground cable into one of the audio INS would be ok? if not, and the ground indeed needs to be connected to an audio OUT, do i simply convert the rca jack to a miniplug? i'd hate to do that and lose my headphone jack. any help would be greatly appreciated.

May 28th, 2005, 08:30 PM	#2
Dan Keaton Inner Circle Join Date: Dec 2002 Location: Augusta Georgia Posts: 5,421	Dear Henry, I believe that both the Audio and Video jacks are live outputs when you are shooting with an XL1s. I assume that the XL1 is the same. I would test this for you, but my XL1s is on assignment tonight. You can easily test this by going into camera mode, and connecting the audio and video out to a suitable tv or monitor. I would follow the instructions, even if the audio out is not enabled on your XL1 it should still be a good ground. __________________ Dan Keaton Augusta Georgia

May 29th, 2005, 10:35 AM	#3
Henry Cho Major Player Join Date: May 2005 Location: NYC Posts: 516	dan, thank you for your help. unfortunately, i have active video out during shooting on my xl1, but the two sets of audio jacks are INS. i'm running the ground cable through one of the right channel INS, and haven't had any problems... yet. thanks again... Last edited by Henry Cho; May 29th, 2005 at 01:58 PM.