DV Info Net
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

DV Info Net (https://www.dvinfo.net/forum/)
-   All Things Audio (https://www.dvinfo.net/forum/all-things-audio/)
-   -   H4N firmware update that enables... (https://www.dvinfo.net/forum/all-things-audio/487699-h4n-firmware-update-enables.html)

Adam Gold December 15th, 2010 05:44 PM
Note that this update only affects the INPUTS, as noited in the first post, not the onboard mics, whose levels are still ganged together. Still a very nice update.

Luciano Alexandresco December 31st, 2010 12:48 PM
H4n Recorder Firmware update issue
 
I have the same problem.I updated to firmware 1.7 and everything seamed normal,but when i go to the menu,some of the feature are gone.I can't find the mode button,and others.i can't switch to mp3 or wave,and i can't switch to 4 channels or MTR mode.How do you restore this thing?

Russ Ivey December 31st, 2010 04:01 PM
Same problem
 
I'm having a similar problem too. I followed directions just like it said, but it doesn't give me the added feature it says it would. Also, what is this about turning the power on with play/pause button???? That doesn't work!!!

Colin McDonald December 31st, 2010 04:54 PM
Are you sure you read that correctly?

Quote:
How to update the system software

4) Then turn power on while holding down the [PLAY/PAUSE] key.

5) Move the cursor to “OK” by using the [DIAL].

6) Push the [DIAL] to start the system update.
You omitted the "while holding down" bit.

Warren Kawamoto December 31st, 2010 09:13 PM
Quote:
Originally Posted by Manuel Coronado (Post 1594802)
I'm having issues with the firmware upgrade. Successfully installed it. Now I cant change it from Stereo to 4CH. It appears like that option was deleted from the menu. Searched everywhere and cant find it. Was wondering if anyone else was having that issue. Is there somewhere where I can download a previous version of the firmware? Thanks.
If your unit has stamina switched on, you can't access the 4 ch. Turn the stamina off.

Luciano Alexandresco January 1st, 2011 01:05 PM
Problem solved
 
Warren,turning stamina off worked.It seamed that with the 1.6 firmware,before i updated,this menu showed with the stamina mode on.But i might be wrong!:-)
Thanks for your help!

Russ Ivey January 1st, 2011 04:21 PM
Quote:
Originally Posted by Colin McDonald (Post 1603390)
Are you sure you read that correctly?



You omitted the "while holding down" bit.
I held it down Colin for several seconds. It doesn't turn the device on.

Mark Watson January 1st, 2011 04:56 PM
Russ,

To put it another way....

1. Press and hold the PLAY/PAUSE button.
2. Actuate the power slide switch.
3. Once the unit turns on, release the PLAY/PAUSE button and power switch.

Russ Ivey January 2nd, 2011 06:46 PM
Mark
 
Thanks Mark!! That was exactly what I needed. It rebooted and everything is working fine now.


All times are GMT -6. The time now is 06:26 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

DV Info Net -- Real Names, Real People, Real Info!
1998-2025 The Digital Video Information Network