|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
February 1st, 2014, 05:27 PM
|
#1 |
|
Major Player
Join Date: Apr 2006
Location: MOSCOW
Posts: 860
|
Sennheiser EK 500 + SK 500, VS. G2/G3 system
I have an older EK 500 + SK 500, working off 9 volt, preliminary test shows better range compared with G2 transmitter/ receiver system. Does it sound right? or I have a defective G2 system?
|
|
|
|
February 3rd, 2014, 01:10 PM
|
#2 |
|
Inner Circle
Join Date: Aug 2008
Location: New York
Posts: 2,038
|
Re: Sennheiser EK 500 + SK 500, VS. G2/G3 system
Never used the older EK system. Look at the operating manual's specifications and note the RF power output. The G2/3 is 30mW, if the EK system is higher, that would be logical.
Many other variables can affect range though. |
|
|
|
|
February 5th, 2014, 04:19 AM
|
#3 | |
|
Major Player
Join Date: Oct 2008
Location: Oxfordshire, UK
Posts: 976
|
Re: Sennheiser EK 500 + SK 500, VS. G2/G3 system
Quote:
The transmitters of the G1 system, as far as I remember, are the same as the G2 and G3.
__________________
John Willett - Sound-Link ProAudio and Circle Sound Services President: Fédération Internationale des Chasseurs de Sons |
|
|
|
|
|
February 5th, 2014, 07:56 AM
|
#4 |
|
Trustee
Join Date: Jul 2003
Location: Burlington
Posts: 1,976
|
Re: Sennheiser EK 500 + SK 500, VS. G2/G3 system
The newer SK 500 transmitters have switchable RF output levels of 10 or 30mW. The older AA versions were 30mW only I believe. I'm not sure about the oldest 9v versions.
|
|
|
|
|
| ||||||
|
||||||
|
|
