|
|||||||||
|
Thread Tools | Search this Thread |
December 18th, 2006, 04:14 PM | #31 |
New Boot
Join Date: Oct 2006
Location: Fort Worth, TX
Posts: 24
|
I checked the cord, and I only got continuity on the sleeve-pin1. Seems kinda weird, I tried several times to make sure I was getting the probe in the right place. I'm still just getting the left channel, so that makes me suspicious of my test methodology - or could it have some circuitry in there that requires more volts than my voltmeter puts out to check continuity?
I think I will be saving up for a small portable mixer... |
| ||||||
|
Thread Tools | Search this Thread |
|