Using LANC to control camera and DOF adaptor operation?

Wayne Morellini · November 30th, 2006, 08:07 AM

What happened to Toenis. This is right up his ally. Good idea compared to Lanc, but I suppose Toenis wants to put a Lanc controller on it, which is easier.

Toenis Liivamaegi · November 30th, 2006, 11:51 AM

I`m waiting for the stereo minijacks to arrive to properly test my hypothesis.
So far my intentions were only to power and start/stop a DOF adaptor.
We tested diferent outputs on diferent cams and all LANC controls are putting out 5V when camcorder is turned ON so we really don`t need any lanc connection on DOF adaptor only that 5V that turns on and of an adaptor.

Cheers,
T

Wayne Morellini · November 30th, 2006, 09:45 PM

I see what you mean, must have missed that, still great improvement. I think that Lanc control of the lens itself is nice for tripod mount, set/follow focus etc. If I do an adaptor, I would like to do manual electronic lens control through my own control interface.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

November 30th, 2006, 08:07 AM	#16
Wayne Morellini Inner Circle Join Date: May 2003 Location: Australia Posts: 2,762	What happened to Toenis. This is right up his ally. Good idea compared to Lanc, but I suppose Toenis wants to put a Lanc controller on it, which is easier.

November 30th, 2006, 11:51 AM	#17
Toenis Liivamaegi Major Player Join Date: Nov 2005 Location: Tartu, Estonia Posts: 579	I`m waiting for the stereo minijacks to arrive to properly test my hypothesis. So far my intentions were only to power and start/stop a DOF adaptor. We tested diferent outputs on diferent cams and all LANC controls are putting out 5V when camcorder is turned ON so we really don`t need any lanc connection on DOF adaptor only that 5V that turns on and of an adaptor. Cheers, T

November 30th, 2006, 09:45 PM	#18
Wayne Morellini Inner Circle Join Date: May 2003 Location: Australia Posts: 2,762	I see what you mean, must have missed that, still great improvement. I think that Lanc control of the lens itself is nice for tripod mount, set/follow focus etc. If I do an adaptor, I would like to do manual electronic lens control through my own control interface.