Chad Solo
September 17th, 2007, 10:14 PM
Hello all I have my new system built and running pretty good at this point but I'm little baffled by my raid0 setup. I did two rendering tests on the same file with After Effects CS3 the first test I rendered to the Raid Drive and it rendered out at 2:25 minutes the file size was 3.91 gigs the second test I rendered to the Desktop and it only took 2:04 seconds. I though going to Raid setup speed things up? Maybe something is wrong with my setup. Any suggestions would be so much appreciated.
CS
XP Media Center
ABIT IP35 Pro LGA 775 Intel P35 ATX Intel Motherboard , XFX PVT84JUDD3 GeForce 8600GT 256MB 128-bit GDDR3 PCI Express x16 SLI Supported Video Card,Intel Core 2 Quad Q6600 Kentsfield 2.4GHz LGA 775 Processor,MASSCOOL 8WA741 92mm Ball CPU Cooler ,Crucial Ballistix 4GB (4 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit ,System Drive-HITACHI Deskstar T7K500 HDT725050VLA360 (0A33437) 500GB 7200 RPM SATA 3.0Gb/s Hard 2-Western Digital Caviar SE16 WD3200AAKS 320GB 7200 RPM SATA 3.0Gb/s Hard Drive(Raid 0), COOLER MASTER RC-690-KKN1-GP Black SECC/ ABS ATX Mid Tower Computer Case , COOLER MASTER Real Power Pro RS-650-ACAA-A1 ATX12V / EPS12V 650W Power Supply
CS
XP Media Center
ABIT IP35 Pro LGA 775 Intel P35 ATX Intel Motherboard , XFX PVT84JUDD3 GeForce 8600GT 256MB 128-bit GDDR3 PCI Express x16 SLI Supported Video Card,Intel Core 2 Quad Q6600 Kentsfield 2.4GHz LGA 775 Processor,MASSCOOL 8WA741 92mm Ball CPU Cooler ,Crucial Ballistix 4GB (4 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit ,System Drive-HITACHI Deskstar T7K500 HDT725050VLA360 (0A33437) 500GB 7200 RPM SATA 3.0Gb/s Hard 2-Western Digital Caviar SE16 WD3200AAKS 320GB 7200 RPM SATA 3.0Gb/s Hard Drive(Raid 0), COOLER MASTER RC-690-KKN1-GP Black SECC/ ABS ATX Mid Tower Computer Case , COOLER MASTER Real Power Pro RS-650-ACAA-A1 ATX12V / EPS12V 650W Power Supply