Hi
Has anybody got any technical details of the back phono outputs and also is that a dc output at the back?

The yellow RCA jack is composite video output, nominally 75 ohms, 1 volt p-p.

The red and white RCA jacks are the Audio 1 input/output jacks., nominally 600 ohm input impedance. When in output mode, the output impedance is on the order of 3K and nominally line level.

The 4-pin DIN jack is S-VIDEO output.

The small 2.5 mm jack provides 5 vDC power for the MA-100 or MA-200 XLR adapter, and can also power (on the LX1) an RU-E3a RF unit (for Channel 3/4 output).

The green 3.5mm phone jack is for head phones

only 5v

the mod im doing needs 12v dc. ohwell just have to wait till the parts arrive to see what i can do

Thanks

And I suspect that the 5 vDC has a rather limited power capacity in terms of milliamps. It is not designed to power significant loads.

hmmm, the device i would of hoped to try would use upto 100mw. but it needs 12v