XL1/1s back outputs at DVinfo.net

Shazad Rayaz · January 20th, 2005, 04:25 AM

Hi
Has anybody got any technical details of the back phono outputs and also is that a dc output at the back?

Don Palomaki · January 20th, 2005, 05:05 AM

The yellow RCA jack is composite video output, nominally 75 ohms, 1 volt p-p.

The red and white RCA jacks are the Audio 1 input/output jacks., nominally 600 ohm input impedance. When in output mode, the output impedance is on the order of 3K and nominally line level.

The 4-pin DIN jack is S-VIDEO output.

The small 2.5 mm jack provides 5 vDC power for the MA-100 or MA-200 XLR adapter, and can also power (on the LX1) an RU-E3a RF unit (for Channel 3/4 output).

The green 3.5mm phone jack is for head phones

Shazad Rayaz · January 20th, 2005, 04:08 PM

only 5v

the mod im doing needs 12v dc. ohwell just have to wait till the parts arrive to see what i can do

Thanks

Don Palomaki · January 20th, 2005, 07:12 PM

And I suspect that the 5 vDC has a rather limited power capacity in terms of milliamps. It is not designed to power significant loads.

Shazad Rayaz · January 21st, 2005, 04:48 AM

hmmm, the device i would of hoped to try would use upto 100mw. but it needs 12v

January 20th, 2005, 04:25 AM	#1
Shazad Rayaz Tourist Join Date: May 2004 Posts: 4	XL1/1s back outputs Hi Has anybody got any technical details of the back phono outputs and also is that a dc output at the back?

January 20th, 2005, 05:05 AM	#2
Don Palomaki Wrangler Join Date: Sep 2001 Location: Northern VA Posts: 4,487	The yellow RCA jack is composite video output, nominally 75 ohms, 1 volt p-p. The red and white RCA jacks are the Audio 1 input/output jacks., nominally 600 ohm input impedance. When in output mode, the output impedance is on the order of 3K and nominally line level. The 4-pin DIN jack is S-VIDEO output. The small 2.5 mm jack provides 5 vDC power for the MA-100 or MA-200 XLR adapter, and can also power (on the LX1) an RU-E3a RF unit (for Channel 3/4 output). The green 3.5mm phone jack is for head phones __________________ dpalomaki@dspalomaki.com

January 20th, 2005, 04:08 PM	#3
Shazad Rayaz Tourist Join Date: May 2004 Posts: 4	hmmmmmmmm only 5v the mod im doing needs 12v dc. ohwell just have to wait till the parts arrive to see what i can do Thanks

January 20th, 2005, 07:12 PM	#4
Don Palomaki Wrangler Join Date: Sep 2001 Location: Northern VA Posts: 4,487	And I suspect that the 5 vDC has a rather limited power capacity in terms of milliamps. It is not designed to power significant loads. __________________ dpalomaki@dspalomaki.com

January 21st, 2005, 04:48 AM	#5
Shazad Rayaz Tourist Join Date: May 2004 Posts: 4	thanks hmmm, the device i would of hoped to try would use upto 100mw. but it needs 12v