View Full Version : New XDCAM Transfer 2.11 and Clip Browser 2.6 where to find it ...


Daniel Goyette
October 20th, 2009, 10:38 PM
From the following link you will found at page 22 Sony tell about these new versions and i read 10.6 as compatible so where i can find them ...

http://www.sony.ca/xdcamex/files/new_xdcamex_fam.pdf

Alister or others in the know since Sony talk about-it can you give us infos about-it or ask your Sony Contact about when it would be release .....

Markus Bo
October 21st, 2009, 03:01 AM
I talked to Sony guys yesterday on a fair in Germany and they handle december/january as launch date

Steve Gibbons
October 21st, 2009, 11:10 AM
I hope batch clip meta-data editing is added.

Alister Chapman
October 22nd, 2009, 04:50 AM
Steve: This has been added you can now batch edit metadata across all clips or selected clips. I was told late November for release. It has to be available when the EX1R ships so users can manage the new SD and HD modes.

Daniel Wright
October 22nd, 2009, 02:10 PM
...or if you can't wait that long, the XDCAM Transfer tool already allows you to enter metadata with a multiple selection of clips. This works across clips from multiple folders too.

Speaking of XDCAM Transfer, any news on new features there? Didn't seem to be much in the document.

Uwe Boettcher
October 25th, 2009, 03:37 AM
Hello Alister!

You mentioned in your Blog, that the new Clip Browser 2.6 have a very nice feature!

The “Acquisition” display!

Are we able to see all informations of our "old" EX1 files with it, or do we need a new Firmware and only the new Clips will have the informations?

Kind regards,
Uwe

Alister Chapman
October 25th, 2009, 04:04 AM
I'm not sure how it will work with older cameras. I need to load some old EX files and see what works. As Clip Browser 2.6 will be needed to handle the EX1R AVI files it should come out the same time as the camera, which should be December.

Uwe Boettcher
October 25th, 2009, 04:15 AM
That would be fine, if you could find it out!!!
Is a screenshot of the Acquisition display with the informations possible?

Thank you!!!

Alister Chapman
October 25th, 2009, 09:06 AM
I'm pleased to report that the Acquisition window works with my original EX1, so I can watch the zoom and focus animate as I change the settings on the camera.

There is a frame grab of the screen in my blog.

Uwe Boettcher
October 25th, 2009, 10:39 AM
Thank you very much!!!

Sadly i can not see any picture there.

Alister Chapman
October 25th, 2009, 10:39 AM
There should be a picture: XDCAM-USER.com Alister’s Blog (http://www.xdcam-user.com/?page_id=5)

Uwe Boettcher
October 25th, 2009, 10:54 AM
Sorry Alister, Firefox and IE8 show nothing. :-((

Alister Chapman
October 25th, 2009, 11:23 AM
I've uploaded a new jpg screen grab to my blog. That should work now.

Uwe Boettcher
October 25th, 2009, 11:28 AM
YES!!! :-))

Thank you very much!