Skye Giebink
May 4th, 2010, 11:40 AM
What card readers are you guys using with your T2i?
| 
 View Full Version : Card reader for T2i? Skye Giebink May 4th, 2010, 11:40 AM What card readers are you guys using with your T2i? Evan Agee May 4th, 2010, 02:04 PM I've got a cheap Targus reader from Kmart. Not sure there's much difference between the card readers on the market. Could be wrong though :) Chris Hurd May 4th, 2010, 02:12 PM Just make sure it's capable of reading SDHC (as opposed to plain-jane Secure Digital). Most older card readers, and some new ones that are cheap, are not SDHC compatible. Bruce Foreman May 11th, 2010, 05:16 PM Most modern PCs will read SDHC cards plugged into the SD slot.  If yours is over 2 years old it may not but it's worth trying before you buy a reader. Otherwise search B&H for SDHC card readers, set relevance for price low to high and check them out. I used to get a real simple SanDisk reader that took an SDHC card at one end and the other plugged into any USB 2.0 port. The ones I got were packaged with a 4GB SanDisk Ultra II card, but I haven't seen any packaged like that since. If nothing at B&H strikes your fancy try amazon Chris Barcellos May 11th, 2010, 10:03 PM I bought a Targus too,  I think at Walmart,   its much faster than the one that was on board by Dell XPS 420,  which is about a year and a half old....  |