|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
May 4th, 2010, 11:40 AM
|
#1 |
|
Regular Crew
Join Date: Feb 2003
Location: South Dakota
Posts: 54
|
Card reader for T2i?
What card readers are you guys using with your T2i?
|
|
|
|
May 4th, 2010, 02:04 PM
|
#2 |
|
Regular Crew
Join Date: Oct 2009
Location: Fort Worth, TX
Posts: 93
|
I've got a cheap Targus reader from Kmart. Not sure there's much difference between the card readers on the market. Could be wrong though :)
|
|
|
|
|
May 4th, 2010, 02:12 PM
|
#3 |
|
Obstreperous Rex
|
Just make sure it's capable of reading SDHC (as opposed to plain-jane Secure Digital). Most older card readers, and some new ones that are cheap, are not SDHC compatible.
|
|
|
|
|
May 11th, 2010, 05:16 PM
|
#4 |
|
Trustee
Join Date: Nov 2006
Location: San Angelo Texas
Posts: 1,518
|
Most modern PCs will read SDHC cards plugged into the SD slot. If yours is over 2 years old it may not but it's worth trying before you buy a reader.
Otherwise search B&H for SDHC card readers, set relevance for price low to high and check them out. I used to get a real simple SanDisk reader that took an SDHC card at one end and the other plugged into any USB 2.0 port. The ones I got were packaged with a 4GB SanDisk Ultra II card, but I haven't seen any packaged like that since. If nothing at B&H strikes your fancy try amazon |
|
|
|
|
May 11th, 2010, 10:03 PM
|
#5 |
|
Inner Circle
Join Date: Nov 2005
Location: Elk Grove CA
Posts: 6,838
|
I bought a Targus too, I think at Walmart, its much faster than the one that was on board by Dell XPS 420, which is about a year and a half old....
__________________
Chris J. Barcellos |
|
|
|
|
| ||||||
|
||||||
| Thread Tools | Search this Thread |
|
|
