Both Systems SOLD. Here's what we have left:

1 Sennheiser E835 Microphone - $50 shipped

2 Sennheiser ME2 Clip on Lav Mics - $50ea. Shipped.

Thanks
Kit

This ram was Sold !

Bump ... You can email me and give me an offer

one Anton Bauer DIONIC 90 Lithium-Ion Battery with one Anton Bauer Gold Mount Plate to Mount DIONIC batteries on JVC HD100U Camcorder. Both like new:seldom used. $395 shipped in USA. B&H sells $550 for both.

Sennheiser ME66/K6 - Super-Cardioid Short Shotgun Condenser Microphone Capsule with K6 (Battery/Phantom) Power Supply with Rycote 19/20 Softie with Mount and Pistol Grip for sale. Seldom Used. asking $300 for ME66/K6 OR $425 for entire set. Cash and carry or Prepaid for shipping. Thank You,.

emailed you

I have a Sony GV-D1000 deck for sale, with memory stick and Sony Infolithium Battery for $700.00. Local Pickup is fine here in Chandler Arizona. Under Warranty from Mack till 02/2009.

I have my pictures posted here of the unit:

http://phoenix.craigslist.org/pho/450144919.html

Please do not hesitate to contact me if you should have any questions.

Sent email

..... The System Is Sold .......

E-mail sent

Bump $935 shipped

Looking for $535 Shipped. marstaton4@hotmail.com

Hi, I have this mic that it is not used anymore (we hire soundman with there own stuff now).

It's a decent microphone that have served me well.

It comes with two barels, one omni and one shotgun so you get 2 mics in one. It works on 1 AAA battery. No phantom power needed.

I am selling it with a shockmount that can be attached either on camera or on a boom pole. The windscreen is not the original one but a Windtech SG-2 and it is more effective than the one that come with the mic.

I am asking 125$ for it + shipping and paypal fees. (it is 220$ new at B&H)

Pictures (sorry, I don't know how to attach files)

http://sunens.uqac.ca/~jparchib/azden1.jpg
http://sunens.uqac.ca/~jparchib/azden2.jpg
http://sunens.uqac.ca/~jparchib/azden3.jpg
http://sunens.uqac.ca/~jparchib/azden4.jpg
http://sunens.uqac.ca/~jparchib/azden5.jpg

Bump to the top...

Item has been sold.

will repost later if I still have it.

Hello All,

I have an almost brand new Brevis HD Imaging bundle for sale. The is the Brevis RC2 with micro-collimation with the CL1 screen. It comes with the both and EOS and FD mounts. I'm also including the Bravis to Rails mount and the Cinevate 72mm spacer.

It has never been used on a production and is only about a six weeks old. I bought it for a project then decided not to use it. New price for this equipment would be $1300 US including shipping. I will sell the whole package for $1050 including ground shipping. It's sitting here ready to go. I will accept paypal from verified paypal users only.


Thanks,

Scott

Looking for $1050 shipped pics available upon request. This is a high end 4 channel mixer in Mint Condition which can be powered by NP1's for long life. The portabrace case and neck strap give you the ability to be mobile and keep your hands free. The breakaway cable included is over $200 and lets you feed two cameras if also using the other set of xlr outputs and gives you a headphone return.

Thanks
marstaton4@hotmail.com for more info

Due to the theft of my wireless rig on a cross country flight, I am left with a like new plug on transmitter. It is a UH100 and transmits in Block 27. It works great, but I do not have a Block 27 reciever anymore. I am asking $300.

Thanks,
Paul

bump it up

$3650 shipped

$3650 shipped...

...bump...

Looking for a good tripod with the 3063 or 3066 head. Legs don't matter but I want a complete tripod. Dan.

emailed....

Bump

Hey Stephen - did you get my email?

Bogen ball head SOLD!!!

Thanks Bart

The rest is going to ebay this week.

Don

I've upgraded my tripod (and zoom controller) so the old stuff is up for sale. I bought the tripod/head and zoom controller new, approximately 8 months ago and used it all sparingly so it's all in excellent condition. Price is $450 plus shipping and insurance (my zip is 91604). Tripod will come with the carrying case, pan handle, ground level spreaders and tripod plate. Zoom controller is the Varizoom VZ-Rock Lanc controller.
Greg

sent email

2 Deluxe VidLeds.

1 Deluxe WarmLed-40 with Gel Pack and charger

1 Deluxe DayLed-40 with Gel Pack and charger.

Both are the versions that have a built in battery. They haven't been used much. I bought them for a trip to Africa where I used them and liked them, but haven't had much need of them since.

$350 for each or $675 for both (they are normally $435 new).

I only have one hot shoe adapter so that goes to the first one sold.

PM me offers.

GL2 shipped this morning! Thanks for all those who were interested

Canon GL2 For Sale

Pristine condition - like new.

Low-milage: approximately 40 hours on heads based on the number of tapes I've shot. Never used as a deck. (I have a Sony DSR-11 capture deck.)

All original accessories, including original box - (manual might be missing. I swear I have it, but can't put my hands on it, yet.)

Also screw on Professional Digital Wide Angle lens

Also Very nice Portabrace bag big enough to carry the camera, extra batteries, on board light, extra lens, power adapter and more.

$1,200 shipped in Continental US.
Or $1,100 without the Portabrace bag.

Pictures here:
http://web.mac.com/vencevida/iWeb/Site/Home.html

Vence Vida

Small bump for Dave here,

For those of you who might be interested by the HC5... i have just received the HC1 of Dave yesterday with some accessories and everything was i described and in nice working condition. A good seller !

Philippe

Email sent...

I've received a few emails from people who are interested but I'm waiting to hear back from Shane since he was first to reply. So unless he changes his mind the tripod is spoken for (head and controller too). I'll post here if he does change his mind.
Thanks all,
Greg

I am (reluctantly!) selling my Sony FX-1.

I've put together a few picts at http://www.boville.net/Sony_FX1/

Price: $2100 + shipping and Paypal.

Also includes the remote and the larger Sony battery. It was used for a little citizen journalism that I do in my neighborhood--camera never loaned out (I never let anyone else touch it!).

I couldn't figure out how to tell how many hours are on it but if someone will remind me I'll let you know. Includes what is in the picture, in original box (+ remote).

Shipping from San Francisco Bay area. Everything works etc.

The only potential "flaw" is that when I first owned the camera I used get a thin black line at the very top edge of the image. The problem mysteriously vanished (note I changed computers and software during this same time). I also discovered that an old tape that I shot had the line when I processed it a year or so ago (when the camera was new and I was new, too) but when I used that same tape to make a new version the line was gone. That seems support to the idea that the problem is not in the camera.

Here is an example where it shows:

http://video.photodemocracy.org/Coas...s_Slide_Closed

And here is a version I recut from those same tapes a year later where it has inexplicably vanished:

http://www.montarafog.com/video/720q...ad_Closed_x720

I say all this not to scare you off but to offer full disclosure. I'm a big believer in accurately describing things for sale over the Internet, even over describing problems.

Seven-day return policy fir USA customers if returned in same condition as sent. Buyer pays return shipping and insurance.

Overseas customers are welcome. For non-USA customers I have a "no return" policy (learned the need for this from e-bay, unfortunately)--I will ship with insurance and tracking at your cost--lost packages, etc will have to be dealt with between you and the shipper (though I will provide all documentation, photos, etc). That said I've never had a lost or damaged pacaked and about 40% of my sales go overseas.

I'm "boville" on e-bay if you'd like to check my feedback.

If you are in the SF Bay area come by and see it. I take paypal, etc.

Thanks,

--Darin

PS: This camera was offered here before but was sold on e-bay but never shipped to the customer. The buyer ran into all sorts of unusual, international issues and I decided the best course was just to refund the money and sell it elsewhere.

Hey Guys, I am selling my Video Editing System I need money. New Jersey New York City buyers if you would like we can do a face to face, cash for computer Trade. Others I'll do it through ebay. If you want to buy I'll put it on ebay as a buy it now option and tell you when it goes up. (if any of this does not work for you let me know we'll work something out)

Copied From my FACEBOOK Listing:
$4,500 - Video Editing Workstation (Mac Based)
Listed by you on October 17th|Edit|Remove
For Sale - Electronics | 46 views
Condition: used

General Computer Section

Processor
2x 2.5 GHz Dual-Core IBM PPC G5 Series (quad core total)

Memory
Slots: 8x FB-DIMM Slots Type: 533 MHz PC2-4200 DDR2 ECC FB-DIMM Installed: 4 GB (8x512 MB) RAM Capacity: 16 GB Configuration: 256 MB, 512 MB, 1 GB or 2 GB ECC FB-DIMMs; Memory should be installed as 4 or more matching chips to take full advantage of the 256-bit wide memory architecture

Graphics Display
Interface: Double-wide 16-lane PCI Express graphics slot
Installed: nVIDIA GeForce 6600 with 256 MB of GDDR2 SDRAM, 1x Single-Link DVI Port, 1x Dual-Link DVI Port

Supported Resolutions
Dual-Link Digital: 2560 x 1600
Single-Link Digital: 1920 x 1200
Analog: 2048 x 1536

Dual Display Support: Dual-display support for extended desktop and video mirroring modes

Hard Drive
Fixed Bays: 2x Independent 3 Gb/s Serial ATA
Installed: 2x 500 GB 7200 rpm with 8 MB Buffer
Supported: 2x SATA Hard Drives
Type: Serial ATA, supports up to 300 MB/sec data throughput per hard drive

External Storage
1 500gb Lacie

Optical Drive
16x SuperDrive with double-layer support

Reads
CD: 32x
DVD: 16x

Writes
CD-R: 24x
CD-RW: 24x
DVD-R: 16x
DVD+R DL: 6x

PCI Expansion
1x open full-length PCI Express expansion slots
Configurable bandwidth that mechanically supports 16-lane cards
300 Watts combined max for all PCI Express slots



Video Specs

Video System
NTSC, PAL

Video Formats
Final Cut Studio via FireWire
DV, DVCAM, DVCPRO, DVCPRO50, DVCPRO HD

Decklink HD Extreme
HD: 1080p24, 1080p25, 1080p30, 1080i48, 1080i50, 1080i59.94, 720p30, 720p59.94, 720p60
SD: 625/25 PAL, 525/29.97 NTSC, 525/23.98 NTSC

Audio Formats
8-96 kHz at 8-24 bits



Input/Output Connectors

Ports
1x FireWire-800 ( 1x Back)
2x FireWire-400 (1x Front, 1x Back)
3x USB 2.0 (1x Front, 2x Back)
2x USB 1.1 (2x Keyboard)

Display
1x Single-Link DVI
1x Dual-Link DVI
1x DVI to VGA Adapter Included

Audio
1x Built-In Speaker
1x 1/8" (3.5mm) Headphone (1x Front)
1x 1/8" (3.5mm) Line-Out (1x Back)
1x 1/8" (3.5mm) Line-In (1x Back)
1x Toslink Optical Input (1x Back)
1x Toslink Optical Output (1x Back)

Video
Powermac Quad
DV: 2x via FireWire-400

Decklink HD Extreme
Digital: 1x SDI Input, 2x SDI Output
Analog: 12-Bit YUV/RGB/NTSC/PAL/S-Video Switchable to NTSC/PAL/S-Video in SD Mode Input, 14-Bit YUV/RGB/NTSC/PAL/S-Video Switchable to NTSC/PAL/S-Video in SD Mode

Storage
2x SATA Drives Supported (2x Installed)

Network
Wired
2x independent 10/100/1000BASE-T Ethernet (RJ-45)

Wireless
Wi-Fi: Airport Extreme 802.11b/g
Bluetooth: 2.0+EDR



General

Operating System
Mac OS X v10.4 Tiger

Dimensions (WxHxD)
8.1 x 20.1 x 18.7" (20.6 x 51.1 x 47.5 cm)

e-mail me lmaddalena (at) mac (dot) com

increasing the deal a little more.

Ill include both batteries- the E7s and E10s, which is a hefty battery on its own.

Again this package includes the IDX elura charger, E7s and E10s batteries, anton bauer power tap, and all original accessories.

$3600 paypal shipped.

increasing the deal a little more.

Ill include both batteries- the E7s and E10s, which is a hefty battery on its own.

Again this package includes the IDX elura charger, E7s and E10s batteries, anton bauer power tap, and all original accessories.

$3600 paypal shipped.

Okay, a change in the plan, but increasing the deal a little more.

Ill include both batteries- the E7s and E10s, which is a hefty battery on its own.

Selling the Firestore seperately unless someone wants to purchase it for $575

Again this package includes the IDX elura charger, E7s and E10s batteries, anton bauer power tap, and all original accessories.

$3600 paypal shipped, or

$4175 with firestore included.

new price 40 euros

If Shane or someone else doesn't take it, I would REALLY like it. :)

Thanks everyone for the interest. Next time you need to be quicker than Shane- he's fast! Kit has been sold.

Looking to buy an 8gb iPhone (preferably unlocked v 1.0.2).

If you've got one, or a good source, please email me.

Thanks!

listed on ebay

Boom pole and Shock mount SOLD!

Thanks Philip

The rest is going to ebay tomorrow1

Don B.

Hi David,

If it helps you to know the marketplace, many videographers like the Raider icuff that sells new for US $50

Good luck, Michael

Doug,
I have sent you an e-mail.
Jack

Hi there,
We have a JVC GY-HD110 Camera available, Like new. We purchased this in February of this year and it's been a great camera for us. We are upgrading to a larger, full size camera, so we will no longer be needing this.

Details:

Camera has only 4 hours on the heads!
2 batteries and charger
Included are 4 firewire cables, one right angle
Original Manuals, boxes and accessories.

Extras!

Kata CC-195 Camera bag ($250 value)
Anton Bauer QR-JVC714HDV Gold Mount Plate ($200 value)
Anton Bauer Powertap connector for powering accessories
Right angle Firewire cable

Everything for $3950 SHIPPED!

Call Kit @ 559-930-2551
or email @ kithannah@comcast.net

Payment via Paypal
Shipping via Fed Ex Ground

Pics:

http://i112.photobucket.com/albums/n190/sonydre1/HD-110/IMG_4893.jpg
http://i112.photobucket.com/albums/n190/sonydre1/HD-110/IMG_4892.jpg
http://i112.photobucket.com/albums/n190/sonydre1/HD-110/IMG_4891.jpg
http://i112.photobucket.com/albums/n190/sonydre1/HD-110/IMG_4889.jpg
http://i112.photobucket.com/albums/n190/sonydre1/HD-110/IMG_4888.jpg
http://i112.photobucket.com/albums/n190/sonydre1/HD-110/IMG_4887.jpg
http://i112.photobucket.com/albums/n190/sonydre1/HD-110/IMG_4885.jpg
http://i112.photobucket.com/albums/n190/sonydre1/HD-110/IMG_4882.jpg
http://i112.photobucket.com/albums/n190/sonydre1/HD-110/IMG_4879.jpg
http://i112.photobucket.com/albums/n190/sonydre1/HD-110/IMG_4877.jpg
http://i112.photobucket.com/albums/n190/sonydre1/HD-110/IMG_4852.jpg
http://i112.photobucket.com/albums/n190/sonydre1/HD-110/IMG_4848.jpg
http://i112.photobucket.com/albums/n190/sonydre1/HD-110/IMG_4835.jpg
http://i112.photobucket.com/albums/n190/sonydre1/HD-110/IMG_4824.jpg
http://i112.photobucket.com/albums/n190/sonydre1/HD-110/IMG_4823.jpg
http://i112.photobucket.com/albums/n190/sonydre1/HD-110/IMG_4818.jpg
http://i112.photobucket.com/albums/n190/sonydre1/HD-110/IMG_4807.jpg

We have another Focus Enhancements Firestore FS-4HD Like New 100GB. Unit is in great condition and has 100GB Hard Drive for tons of record time (8-12 hours). Comes with battery and power cord and will ship in its original box. I will include a firewire cable for you too...

First $600 takes it! Free Shipping! (Hurry, last one sold in less than an hour of posting).

Payment via Paypal
Shipping via Fed Ex Ground.

Thanks!
Kit

559-930-2551
kithannah@comcast.net

Michael ,thank you for the tip.

This is made out of soft rubber, It will fit the face like a DVX eyepiece or a Sony V1 eyepiece. It can be suited to left or right handed user. I also have the icuff which I find to soft for my liking. This is the missing piece that Canon should have made for the XHA1 or XHG1. It fits over the existing eyepiece, there is no need to remove anything, you can still adjust the V.F . It doesn't not block the lever below

It is indispensable when you are shooting outdoor when it is a bright and sunny. It fits the face and covers the whole eye. I can shoot for hours with it on a sunny day. See new picture . It shows the whole eye being covered and covers nicely over the face.

http://www.dvxuser6.com/uploaded/23787/1192782107.jpg

There were so many of you complaining that it is just a rubber. and that you could cut out one by yourselves. I bought a Fig Rig even though I could build a copy with PVC for $20.

I find it very expensive too. But I guess we all know that the Film industry is never cheap, especially specialized parts.

Sometimes it is the look that counts too. What would my client think when I come with a camera with a self made solution on it. Everything seen on a set has to have a "Professional Look". Have you ever head of a saying " You pay peanuts you get monkeys". I want my clients to know that they are paying for a professional cameraman not some weekend warrior.

The question shouldn't be "Isn't 40 euros is abit expensive" , it should be "does the 40 euros give you 40 euros worth of benefit "?

40 euros might be alot to some of us , but for those of us who makes a living from professional shooting . It is not a question of that it cost 40 euros, but that it gives us 40 euros worth of benefits .

In my case I find that it does help me shoot in a sunny and bright environment and my eye feels comfortable even after shooting the whole day. I focus better, I get the job done better and faster.It doesn't hurt my eye and I spend less money on going to the optician to have my eyes check.