Re: Canon EOS C100
 

I wish I knew! I must be at (or very, very, close to) the top of CVP's order list here in the UK - since I placed my order within 24 hours of the C100 announcement/it appearing on their website for pre-order. So I hope I'll get some pleasant news soon...

Re: Canon EOS C100
 

Wow! Black Magic have just released new firmware for the HyperDeck Shuttle 2 that supports recording to ProRes. This makes it far & away the cheapest option for recording from the HDMI of the C100 (& the 5D3 come next April). At little more than the size of a couple of 2.5" SSDs it's compact too.
Blackmagic Design: View Press Release
Blackmagic Design: HyperDeck Shuttle Tech Specs

Re: Canon EOS C100
 

Interesting! Wonder if it will recognise the Record start/stop actions of the C100 like the Ninja 2 can? (i.e. no need to press Record on both the camera and the HDS 2).

Re: Canon EOS C100
 

I see H Preston Media have changed their website so the C100 now says "usually available within 1-2 days" (it did say available from 14th Nov).

I've still not heard anything from CVP. Maybe Preston got the only UK container load! Anyone with an order with them know what's going on?

More thoughts on the Hyperdeck Shuttle 2 ProRes 422 (HQ 220 Mbps) announcement.

1. I'm still favouring a Atomos Ninja 2 for the C100 as that way I'll get an additional screen - so that I can point it to the camera's 'control button side' when doing locked down/sit down interviews (since the C100 screen can't do that particular position - and on the 'dumb' side only at an awkward angle).
2. Also, although relatively cheap, don't forget you really need the mounting plate for the HDS 2 which adds both cost, thickness and weight, plus you'll need a means of powering it. Mind you, the Ninja 2 with a battery or two will add bulk and weight too.
3. Start/stop record feature? My guess is they would have mentioned this in the press release if it had this very useful functionality but I suspect this is the Ninja 2s trump card with the C100 and a few other specified cams - at least until Blackmagic get around to adding this functionality in a future firmware update on the HDS 2.
4. I really do like the fact that the HDS 2 is both SDI and HDMI though - means I could use it on my EX3 as well if I ever wanted to (i.e. without having to buy the extra converter from Atomos - which adds more bulk, weight and cost).

I stress point 3 is speculation on my part until we get some confirmation - maybe someone at today's BVE North in Manchester could ask this specific question on the Blackmagic stand?

Re: Canon EOS C100
 

What about a Sound Devices Pix 220 to get better sound?

Re: Canon EOS C100
 

Nice device but it's 7-8X the price of the HyperDeck Shuttle v2 & weighs 2lbs.

Re: Canon EOS C100
 

Huge moire in the preproduction C100 video. C100 are makeup and crane shots. And handy close up shots, whatever that means, if it is all closeups then that looks good. But look at moire in roof in all crane shots. Unless that is a Vimeo artifact. Don't think so. C100 footage is AVCHD. DR is questionable. Slider shots are C300.

Re: Canon EOS C100
 

You can also see moire in the beginning inside the venue at the ceiling, they say they used a c100/300 but I also see a guy filming with, I think, a Sony vg20 (around 02:00) but maybe it was one of the guests.
Must say that the images in the trailer don't look that spectacular, looks more like something my 550d would be able to do as well. Wonder if it was done with these camera's, I have seen some images from the c300 done by Nigel and there you could easily pick the c300 shots out when paired with a 5D. In the trailer the c100 shots look very soft.

Re: Canon EOS C100
 

Let us hope Canon has cleared this up in the production firmware. BTW it has been reported that The preproduction model clipped at 85 IRE when at 320 ISO.

Re: Canon EOS C100
 

On the subject of the HyperDeck Shuttle.
My preferences is for a recorder that becomes part of the camera.
That means fixing it underneath the camera with a tripod plate beneath the shuttle, so that the camera can be used handheld or on a tripod etc without any fuss.
A friend pointed me to Stefan Sargent's post on his site last year which shares this sentiment and shows his solution.
If you scroll down the page you can see it here:
WHY CAN?T A VIDEO CAMERA BE MORE LIKE A VIOLIN? | ARTICLES
Perhaps Black Magic or somebody else could produce something like this.
Part of the joy of the C100 (and C300) to me is that it doesn't need pimping up.
As simple as possible please eg no rails.
BTW I hope the Hypershuttle will stop and start with the camera. Seems a no brainer and can't be that difficult surely.

Re: Canon EOS C100
 

The 85 IRE cut-off at 320 ISO issue post is right here:

http://www.dvinfo.net/forum/new-cano...ml#post1763723

Also, this user has a file available to download that exhibits no moire at all. I was excited to see that.

Re: Canon EOS C100
 

I read on another forum that 35 Canon C100s have now been shipped to authorised resellers in Oz and that the next batch will be shipped at the end of Nov. I guess we should be seeing more user generated material on the web very soon then!

Re: Canon EOS C100
 

From personal experience I wouldn't believe anything about delivery dates on Preston's website nor indeed any promises that they may give you by email or phone.

Re: Canon EOS C100
 

Some new videos on vimeo

Re: Canon EOS C100
 

These look very promising! Thanks for posting.