|
|||||||||
|
Thread Tools | Search this Thread |
January 26th, 2004, 11:10 AM | #1 |
New Boot
Join Date: Jul 2003
Location: Barcelona
Posts: 23
|
No color on Gl2
I´m in PAL-land (Spain) and the analog outputs of my GL2 showed just fine on the PAL TVs, for a while. One day I lost the color on the analog outputs, and haven´t recovered it yet. Firewire is fine, and the viewfinder and LCD are also fine, but for some reason I´ve lost the color on both S-video and composite outputs. Could this be a NTSC/PAL thing catching up with me? Has this happened to anyone? Thanks!
|
January 26th, 2004, 05:43 PM | #2 | |
Outer Circle
Join Date: May 2002
Location: Hope, BC
Posts: 7,524
|
So you are using the NTSC GL2 is PAL country.
Do you plug the cam straight into your multi-system TV or VCR? Could also be the TV or VCR that has a problem. You've checked the cam to see if isn't set to B&W, I presume? Quote:
|
|
January 27th, 2004, 11:16 AM | #3 | |
New Boot
Join Date: Jul 2003
Location: Barcelona
Posts: 23
|
Thanks for the reply and suggestions.
Quote:
I´m plugging the camera straight into a PAL TV which has no indication that it is multisystem. It´s a Sony triniton about 5 years old. The picture was (surprisingly) fine until somehow the color disappeared. I´ve tried it on another Sony TV, with the same result, so I´m thinking it´s either the cam or something with Sony TVs. I don´t believe the cam is in B&W - the VF shows color and so does the firewire output. |
|
| ||||||
|
Thread Tools | Search this Thread |
|