20/40 Watt Bulbs
Hello there...
Does anyone here think 20 watt bulbs for a camera light are bright enough to use for a wedding or should buy some 40 watt ones? |
I use the Sony camera top light with two bulbs. You can burn one, or both at the same time. I use each setting at various times. For wedding you shouldn't be restricted to using one or the other. You can't do interviews with a 40 watts burning, even with a diffuser that is too much.
|
Ok, but is a 20 watt bulb good enough for just general shooting in a reception hall?
|
It would work much of the time, but there would most definitely be times you would want more, especially if you cannot get close to the action. During dancing it will likely not be enough often times. But it can also depend on your camera technique and editing style.
Go ahead and use 20 watts, you'll get by, but you may become dissatisfied and understand that being restricted to 20 watts is too limiting. At least with 20 watts you'll have something. Just start from there and try it out. Keep in mind even with 20 watts you'll want a diffuser for interviews, or at least you should. |
I see, good to know.
Now I have a very stupid and embarrassing question. The light I have requires a lead acid battery, which I have no experience using before. The battery is of course huge and there is no place to attach it to the camera. I assume that I have to strap it around my waist and plug it in from there, right? Like I said very embarrassing question and sorry for asking. Thanks |
Daniel, when you are asking a question like this it is not necessary to call it stupid. You can just ask it straight out, and we'll know you just don't have experience with it.
But yes, all you can do is strap it on. I don't know where you got your battery, but if you buy the Bescor batteries, for example, they come with a pouch and shoulder strap or waist strap which you choose. Go to Bescor.com and look through their catalog and you'll see what I mean. Their site is weird, and many people actually buy from b and h, which is another place you can see photos. Go to b&h photo/video and do a search for Bescor batteries and you'll see more info. |
I bought it at B&H yesterday. Such a confusing store. Anyway... It came with the strap for the waist. I can just see the cable causing a lot of problems and getting in the way. I really should of looked closer when buying the light.
|
Quote:
|
Quote:
|
Frezzolini | 9579 18" 4-pin XLR Female to NP-1 - | 96710
Switronix | NP-L60 Li-Ion Chemistry NP-1 Style Battery | NP-L60 Switronix | NP-50 NiMH NP-1 Style Battery | NP-50 | B&H Photo IDX | JL-2P 2-Channel Fast Charger/Power Supply | JL-2PLUS | B&H You'll have to ask B&H regarding what they recommend regarding a pouch to place the adapter in. I think Frezzi makes one but never saw it on the B&H site. |
Thanks for the suggestions. They seem a bit out of my budget at this point, so i think I will just stick with the lead acid battery at this point.
|
You might see if you can return the battery and exchange it for one with a shoulder strap. I personally find them too heavy for wearing around the waist, and they are easier to take off and put back on that way.
Otherwise, you could live with the waist strap, its just heavy. |
PAG 6 Light and Battery
I use the PAG 6 system which uses NiCad batteries. Normally I use a 20W bulb and that would get me through a few hours. I had tried a 30W to get more light and while it did give me the extra kick I needed I burned through the battery much faster. Make sure you have a spare or two if you up the wattage.
|
I Use 50Watt Bulb
I use a 50 watt bulb in a Smith/Victor 950K Light (goes up to 100watt bulbs) with a 4 Pin XLR Cable to a Lead Acid battery on my waist. Now this is by far the economical approach to wedding lighting, and probably sub-standard by most people. I've just been using it so long and don't feel like shelling out more dough right now. I have times when I use all 50watts if I have to shoot from the other side of a stupid dark reception. The rest of the time, I combat the brightness with an NRG light dimmer on my belt. This combo works great, you just have to watch your color temps as they get warmer the lower you dim your light. Also slinging that 6lbs battery on your butt can suck. I keep saying this year will be my last doing weddings, which is partly why I don't get something lighter and way more expensive.
On a positive note, this combo, the battery will go all night, never gets memory, and is stupid cheap to buy ($100 for a good Cool-Lux) but it weighs almost 6lbs. For other less light needed situations, I just throw the old Canon 10watt light on. |
I am looking for the 40 watt bulb for my light but B&H doesn't sell it. Why would they sell a light that they advertise as using both 20 and 40 watt bulbs, but then only sell the 20? Can I just use a 30 or 35 watt one instead even though the manufacturer says the light is for 20 and 40 watt ones?
|
All times are GMT -6. The time now is 03:51 AM. |
DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network