|
|||||||||
|
Thread Tools | Search this Thread |
April 22nd, 2010, 03:24 PM | #1 |
Major Player
Join Date: Feb 2003
Posts: 339
|
How do I defeat Auto shut-off/Power down
Gents,
I'm using an A1 with no tape in it. All it's being used for it's image/lens which goes elsewhere.... not even for any audio. Since there is no recording going on with the actual unit itself, it will shut-down after a few minutes which is very annoying as footage/continuity is lost and its has to be reset up & optimized for the environment. Please show me how to bypass & defeat this power saving "feature'! Thanks, Bruce |
April 22nd, 2010, 04:28 PM | #2 |
Inner Circle
|
Hi Bruce.............
Pages 79 - 85 in the manual, Using the Customised Functions.
Item 16 - Power Save. Set it to 01 (OFF) from the default 00 (ON). Then check page 80 - Activating a Custom Function File All page numbers based on the PAL manual, may be different to the NTSC version. CS Last edited by Chris Soucy; April 22nd, 2010 at 06:26 PM. |
April 23rd, 2010, 09:58 AM | #3 |
Major Player
Join Date: Feb 2003
Posts: 339
|
Thanks you nailed it right there.
I'll use a downloaded manual & check it out. Kind Regards, Bruce |
| ||||||
|
Thread Tools | Search this Thread |
|