Mounting ME66 Mic at DVinfo.net

David Kelliher · December 13th, 2004, 02:37 PM

I'm planning to replace Canon's standard camera mic with a Sennheiser ME66. The diameter of the ME66 is much smaller than the Canon mic. What's the best way mount the ME66? Larger rubber bushings? Any thoughts on the best way to cut vibration to the shotgun mic?

Jimmy McKenzie · December 13th, 2004, 03:07 PM

So far, I have had good success with some packaging foam. You need the soft high density black stuff and a sharp x-acto knife to craft just the right shape. Once you have made your "donut" the xl mounting clamp squishes down upon it and somewhat isolates the mic from the cam. It will pick up the drone of the zoom motor in the lens nonetheless.

December 13th, 2004, 02:37 PM	#1
David Kelliher Tourist Join Date: Dec 2004 Location: Philadelphia, PA Posts: 1	Mounting ME66 Mic I'm planning to replace Canon's standard camera mic with a Sennheiser ME66. The diameter of the ME66 is much smaller than the Canon mic. What's the best way mount the ME66? Larger rubber bushings? Any thoughts on the best way to cut vibration to the shotgun mic?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

December 13th, 2004, 03:07 PM	#2
Jimmy McKenzie Major Player Join Date: Jan 2004 Location: Waterloo Ontario Posts: 721	So far, I have had good success with some packaging foam. You need the soft high density black stuff and a sharp x-acto knife to craft just the right shape. Once you have made your "donut" the xl mounting clamp squishes down upon it and somewhat isolates the mic from the cam. It will pick up the drone of the zoom motor in the lens nonetheless.