Cineform CS3 Project Changed at DVinfo.net

Edgar Pitts · March 18th, 2008, 10:32 AM

Greetings. We had an editing workstation crash with some Cineform Aspect projects. After the computer was rebuilt, the projects were opened and saved before Cineform was reinstalled. This was about a week ago. All of the files have since been heavily edited.

After taking a closer look at the project settings, it shows that it is a 1440x1080 project but no longer Cineform. All of the settings are greyed out. Is there a way to change back to Cineform projects? We tried created a new Cineform project and inserting the old project, but a lot of the clips have a X in the top corner with a red render bar above.

If you need some additional information, please let me know. Thanks for your help!!!

Edgar

David Newman · March 18th, 2008, 10:38 AM

Sound like a job for support. Basically you did the right thing, you just need to determine what is wrong or different with the clips that have the red markers.

Edgar Pitts · March 18th, 2008, 10:54 AM

Thanks David. I will submit a support ticket. I do have a few other questions:

Is there any quality drop in continuing to edit the project as is? I assume that it will be a little slower, but will it effect our final export?

Edgar

David Newman · March 18th, 2008, 11:22 AM

No idea, depends what is happening, but likely you will be OK.

Edgar Pitts · March 18th, 2008, 12:47 PM

It appears that the shots with the red bar are multi-cam.

March 18th, 2008, 10:32 AM	#1
Edgar Pitts New Boot Join Date: Oct 2007 Location: Dallas, Texas Posts: 10	Cineform CS3 Project Changed Greetings. We had an editing workstation crash with some Cineform Aspect projects. After the computer was rebuilt, the projects were opened and saved before Cineform was reinstalled. This was about a week ago. All of the files have since been heavily edited. After taking a closer look at the project settings, it shows that it is a 1440x1080 project but no longer Cineform. All of the settings are greyed out. Is there a way to change back to Cineform projects? We tried created a new Cineform project and inserting the old project, but a lot of the clips have a X in the top corner with a red render bar above. If you need some additional information, please let me know. Thanks for your help!!! Edgar

March 18th, 2008, 10:38 AM	#2
David Newman CTO, CineForm Inc. Join Date: Jul 2003 Location: Cardiff-by-the-Sea, California Posts: 8,095	Sound like a job for support. Basically you did the right thing, you just need to determine what is wrong or different with the clips that have the red markers. __________________ David Newman -- web: www.gopro.com blog: cineform.blogspot.com -- twitter: twitter.com/David_Newman

March 18th, 2008, 11:22 AM	#4
David Newman CTO, CineForm Inc. Join Date: Jul 2003 Location: Cardiff-by-the-Sea, California Posts: 8,095	No idea, depends what is happening, but likely you will be OK. __________________ David Newman -- web: www.gopro.com blog: cineform.blogspot.com -- twitter: twitter.com/David_Newman

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

March 18th, 2008, 10:54 AM	#3
Edgar Pitts New Boot Join Date: Oct 2007 Location: Dallas, Texas Posts: 10	Thanks David. I will submit a support ticket. I do have a few other questions: Is there any quality drop in continuing to edit the project as is? I assume that it will be a little slower, but will it effect our final export? Edgar

March 18th, 2008, 12:47 PM	#5
Edgar Pitts New Boot Join Date: Oct 2007 Location: Dallas, Texas Posts: 10	It appears that the shots with the red bar are multi-cam.