|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
August 19th, 2010, 02:45 PM
|
#1 |
|
New Boot
Join Date: Jul 2005
Posts: 12
|
System build for 3D using Neo4K
David: We are considering our first 3D presentation and currently own Neo4K which should do the trick. Our edit system is currently a robust quad-core, but not the eight-core specified in the min firstlight specs for 3D production. In building a new system would a robust AMD based six-core do the trick (cost effective to build) or due we really need to build a dual-quad core system... Thanks and what a wonderful product.....
|
|
|
|
August 19th, 2010, 02:55 PM
|
#2 |
|
CTO, CineForm Inc.
Join Date: Jul 2003
Location: Cardiff-by-the-Sea, California
Posts: 8,095
|
3D functions will run on far lessor systems than recommended, only full res. realtime output is limited on lower end systems. I currently use a 6 core Intel i7 gaming system, not a dual proc workstation, and it is fast enough. I haven't tried the 6 core AMD systems.
__________________
David Newman -- web: www.gopro.com blog: cineform.blogspot.com -- twitter: twitter.com/David_Newman |
|
|
|
|
August 20th, 2010, 09:56 AM
|
#3 |
|
New Boot
Join Date: Jul 2005
Posts: 12
|
Thanks..
Thanks... we will keep you updated on the AMD side if we go that route.
David DTX Creative |
|
|
|
|
| ||||||
|
||||||
|
|
