audio question at DVinfo.net

Robin Probyn · November 19th, 2010, 02:06 AM

Sorry this is probably a really stupid question.. but here goes anyway..

So far I,ve always shot tape same time as recording to nano.. if I plug it all up as usual but dont run tape..
Ofcourse I have to set TC at the nano.. and press record on the nano..

But picture and audio will come through HD SDI same as if there were tape running .. wont it..?

Thanks

Dan Keaton · November 19th, 2010, 04:09 AM

Dear Robin,

Yes.

Just be certain that you camera will not go into standby or shut off after a certain length of time.

Robin Probyn · November 20th, 2010, 07:18 AM

Thanks Dan.. just wanted to hear it for confirmation..!!

Dont think the HDX900 has any auto shut off..

Thanks again

Ernie Santella · November 21st, 2010, 07:39 AM

Also, make sure you are not outputting any Menus, frame markers or TC windows etc over the HD-SDI out on the camera as they will be recorded on the Nano. I did that once by accident.

Dan Keaton · November 21st, 2010, 08:00 AM

Dear Ernie,

Don't feel bad, this has happened to many people.

It even happens when one has a monitor hooked up to the HD-SDI loop thru.

Many of us are accustomed to seeing these in the viewfinder and think nothing of it when they see it in a monitor attached to the nanoFlashes HD-SDI output.

We try hard to warn against this.

Robin Probyn · November 21st, 2010, 08:32 AM

Quote:

Originally Posted by Ernie Santella

Also, make sure you are not outputting any Menus, frame markers or TC windows etc over the HD-SDI out on the camera as they will be recorded on the Nano. I did that once by accident.

Yes thanks.. Ive been using the SDI all the time.. just always shooting tape at the same time...I often quickly plug the monitor into SDI just to check..

I dont ever change those monitor out settings!!!

Doug Jensen · November 22nd, 2010, 04:14 PM

A nice thing about my F800 is that there are two independent SDI outputs, and one of them can never have anything overlaid on the video, so it's always safe to use without any worries.

November 19th, 2010, 02:06 AM	#1
Robin Probyn Major Player Join Date: Jan 2010 Location: Tokyo Posts: 590	audio question Sorry this is probably a really stupid question.. but here goes anyway.. So far I,ve always shot tape same time as recording to nano.. if I plug it all up as usual but dont run tape.. Ofcourse I have to set TC at the nano.. and press record on the nano.. But picture and audio will come through HD SDI same as if there were tape running .. wont it..? Thanks

November 19th, 2010, 04:09 AM	#2
Dan Keaton Inner Circle Join Date: Dec 2002 Location: Augusta Georgia Posts: 5,421	Dear Robin, Yes. Just be certain that you camera will not go into standby or shut off after a certain length of time. __________________ Dan Keaton Augusta Georgia

November 21st, 2010, 08:00 AM	#5
Dan Keaton Inner Circle Join Date: Dec 2002 Location: Augusta Georgia Posts: 5,421	Dear Ernie, Don't feel bad, this has happened to many people. It even happens when one has a monitor hooked up to the HD-SDI loop thru. Many of us are accustomed to seeing these in the viewfinder and think nothing of it when they see it in a monitor attached to the nanoFlashes HD-SDI output. We try hard to warn against this. __________________ Dan Keaton Augusta Georgia

November 22nd, 2010, 04:14 PM	#7
Doug Jensen Vortex Media Join Date: Jan 2009 Location: Florida Posts: 3,415	A nice thing about my F800 is that there are two independent SDI outputs, and one of them can never have anything overlaid on the video, so it's always safe to use without any worries. __________________ Vortex Media http://www.vortexmedia.com/ Sony FS7, F55, and XDCAM training videos, field guides, and other production tools

November 20th, 2010, 07:18 AM	#3
Robin Probyn Major Player Join Date: Jan 2010 Location: Tokyo Posts: 590	Thanks Dan.. just wanted to hear it for confirmation..!! Dont think the HDX900 has any auto shut off.. Thanks again

November 21st, 2010, 07:39 AM	#4
Ernie Santella New Boot Join Date: May 2010 Location: Golden, Colorado Posts: 11	Also, make sure you are not outputting any Menus, frame markers or TC windows etc over the HD-SDI out on the camera as they will be recorded on the Nano. I did that once by accident.