|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
June 10th, 2009, 09:35 AM
|
#1 |
|
Regular Crew
Join Date: Feb 2009
Location: Paris
Posts: 71
|
Out Of Sync ...
Hello All,
I'm using a Sony Z7 (rx'ing on both card and tape) and editing on FCP. The card 'log and transfer' works without a hitch but when I start to 'log and capture' ... the playback (raw or in the timeline) show that the audio follows the picture by around 6 frames. The settings in FCP are as follows: Easy Setup DV DV-PAL Firewire basic Video Settings DV 48khz Audio Settings DV 48kHz Why should there be such a delay in capturing from tapes? I wonder if there's something in the settings that isn't quite right. I'm also getting a slight vertical shift ... not out of the camera but while watching the capture screen ... Anyone had the same problems? I look forward to hearing from you, Stuart |
|
|
|
June 14th, 2009, 12:04 AM
|
#2 |
|
Major Player
Join Date: Jul 2007
Location: Los Angeles, CA
Posts: 628
|
Sounds like this could be a NTSC easy capture setup. Press Shift+Q to make sure your easy setup is indeed in PAL mode instead of NTSC.
Hope this helps, -C |
|
|
|
|
June 14th, 2009, 11:05 AM
|
#3 |
|
Trustee
Join Date: Dec 2008
Location: Kennewick, WA
Posts: 1,124
|
How are you monitoring? On your computer monitor? Or through a converter (DV firewire converter, AJA Io HD, etc... to an external monitor) If you're monitoring through a converter to an external monitor then you need to make sure your audio is going through the converter as well.
__________________
Sony EX3, Canon 5D MkII, Chrosziel Matte Box, Sachtler tripod, Steadicam Flyer, Mac Pro, Apple/Adobe software - 20 years as a local videographer/editor |
|
|
|
|
| ||||||
|
||||||
| Thread Tools | Search this Thread |
|
|
