|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
December 21st, 2009, 03:10 PM
|
#1 |
|
Regular Crew
Join Date: Feb 2002
Location: Morgan, Vermont
Posts: 130
|
Compressor Settings for Exposure Room
Hi:
I am hopelessly confused by the advise one gets on exposureroom.com for Compressor settings. Does anyone have a set of settings for this site to use in Compressor 3.51 |
|
|
|
December 21st, 2009, 06:28 PM
|
#2 |
|
Inner Circle
Join Date: Dec 2005
Location: Rhode Island
Posts: 4,048
|
Tim I use Exposure Room and have decent success. You do have to remember it will only run low bit rates. I run Compressor 3.0.5
What video are you trying to post: Camera? 1080p or i Bit rate from camera how long? |
|
|
|
|
December 21st, 2009, 06:31 PM
|
#3 |
|
Inner Circle
Join Date: Dec 2005
Location: Rhode Island
Posts: 4,048
|
For my 1080p footage from FC I render out full size QT then import into Compressor.
Here are my settings: 1280 x 720 Pixel Aspect Ratio: Square Frame controls off Codec Type H.264 Pixel Depth 24 Spatial Quality 75 Min Spatial Quality 25 Key Frame 29.97 (Since this is the timeline it comes from) quality 100% Average data rate (3.500 Mbps) any faster and it will not run smooth Fast Start On |
|
|
|
|
December 21st, 2009, 08:39 PM
|
#4 |
|
Regular Crew
Join Date: Feb 2002
Location: Morgan, Vermont
Posts: 130
|
Exposure Room Compressor Settings
Hi:
thanks for the settings. All my stuff is in ProRes 10801, inputted from XHAI's. I have had good success uploading to Vimeo with Ken Stone's Compressor settings for Vimeo, but I know they don't work with Exposure Room so well. I will give your settings a try unless you think I should try something else. Tim |
|
|
|
|
December 22nd, 2009, 06:26 AM
|
#5 |
|
Inner Circle
Join Date: Dec 2005
Location: Rhode Island
Posts: 4,048
|
Tim I would start with those setting and play with a 10 sec clip. That way you don't have to wait long to see the results. Good luck and post how it goes.
|
|
|
|
|
| ||||||
|
||||||
| Thread Tools | Search this Thread |
|
|
