Crazy Project best way to capture. at
DV Info Net

Go Back   DV Info Net > Apple / Mac Post Production Solutions > Final Cut Suite

Final Cut Suite
Discussing the editing of all formats with FCS, FCP, FCE

Thread Tools Search this Thread
Old May 20th, 2010, 10:25 PM   #1
New Boot
Join Date: Mar 2008
Location: Leawood KS
Posts: 8
Crazy Project best way to capture.

Hey all,
So I am edditing this really crazy project that someone else imported but nothing is right. There were two cameras used. Its a documentary and the first 1/4 of it was shot with a panasonic 100a. The client says he shot in the 24p mode. Everything else was shot on the Sony Z1U in 1080i. Also in 24p as I am told from the client.

The project will be 1080i.

The SD footage from the 100a was brought in SD and then scaled up. I am recapturing that through a Matrox MXO2 and upscaling it. The problem is I get crazy interlacing.

The HD footage from the Z1U was brought in from the camera and some of it from a deck I believe. Some of the footage has really bad interlacing some of it is fine.

My question is what is the best way to recapture these two cameras? I am using an HVR-1500 and the Matrox MXO2.

Lars Koerkemeier is offline   Reply

DV Info Net refers all where-to-buy and where-to-rent questions exclusively to these trusted full line dealers and rental houses...

B&H Photo Video
(866) 521-7381
New York, NY USA

Scan Computers Int. Ltd.
+44 0871-472-4747
Bolton, Lancashire UK

DV Info Net also encourages you to support local businesses and buy from an authorized dealer in your neighborhood.
  You are here: DV Info Net > Apple / Mac Post Production Solutions > Final Cut Suite

Thread Tools Search this Thread
Search this Thread:

Advanced Search


All times are GMT -6. The time now is 02:27 PM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2021 The Digital Video Information Network