Unable to set same settings for sequence & Capture for HDV 1080i50 at DVinfo.net

Alen Tarassians · February 24th, 2006, 12:03 PM

Hi Everyone,
I am having a problem with my FCP sequence set up.
I followed the standard settings for 1080i 50 HDV:

Sequence Preset: HDV-1080i50
Capture Preset: HDV
Device Control Preset: Sony HDV 1080i50 FireWire
Video Playback: None
Audio Playback: Default

It captured everything fine, but I find myself rendering all the time when I work with the clips on the sequence.

There must be a way where I can set the sequence setting to match my capture settings.

Any ideas?

Alen Tarassians · February 24th, 2006, 05:29 PM

Quote:

Originally Posted by Alen Tarassians

Hi Everyone,
I am having a problem with my FCP sequence set up.
I followed the standard settings for 1080i 50 HDV:

Sequence Preset: HDV-1080i50
Capture Preset: HDV
Device Control Preset: Sony HDV 1080i50 FireWire
Video Playback: None
Audio Playback: Default

It captured everything fine, but I find myself rendering all the time when I work with the clips on the sequence.

There must be a way where I can set the sequence setting to match my capture settings.

Any ideas?

P.S. I am using FCP 5.04

Tim Dashwood · February 24th, 2006, 05:45 PM

Alen,

I'm not sure what the problem is. If you chose the "HDV -1080i50" Easy setup, then the capture setting and sequence setting are automatically set to be exactly the same. There should be no rendering except for Mpeg2 "Constant Frames" to fill in the gaps when you cut into a GOP.

I would suggest setting your bin to show columns for everything from frame size to pixel aspect and then visually compare a clip's settings with the sequence settings. It is usually pretty easy to flag an inconsistency this way and then change it.

Alen Tarassians · February 25th, 2006, 02:42 PM

Thanks Tim.
I have never set my bins to show columns before, but I'll try and see if I can find any inconsistency between the capture settings and sequence setting.
I'll keep you posted.
Alen.

Boyd Ostroff · February 25th, 2006, 10:19 PM

Also remember, when you choose a new "easy setup" it only affects new sequences that you create, and doesn't change any existing sequences. Choose the 1080i50 easy setup, then create a new project. The capture and sequence settings for everything in that project should then be the same.

Alen Tarassians · March 11th, 2006, 05:31 PM

Thank you guys,
It's all working out, and I have started editing my project.
Thank you again.
Alen.

February 24th, 2006, 12:03 PM	#1
Alen Tarassians Tourist Join Date: Feb 2006 Posts: 4	Unable to set same settings for sequence & Capture for HDV 1080i50 Hi Everyone, I am having a problem with my FCP sequence set up. I followed the standard settings for 1080i 50 HDV: Sequence Preset: HDV-1080i50 Capture Preset: HDV Device Control Preset: Sony HDV 1080i50 FireWire Video Playback: None Audio Playback: Default It captured everything fine, but I find myself rendering all the time when I work with the clips on the sequence. There must be a way where I can set the sequence setting to match my capture settings. Any ideas?

February 24th, 2006, 05:45 PM	#3
Tim Dashwood Wrangler Join Date: Aug 2005 Location: Toronto, ON, Canada Posts: 3,637	Alen, I'm not sure what the problem is. If you chose the "HDV -1080i50" Easy setup, then the capture setting and sequence setting are automatically set to be exactly the same. There should be no rendering except for Mpeg2 "Constant Frames" to fill in the gaps when you cut into a GOP. I would suggest setting your bin to show columns for everything from frame size to pixel aspect and then visually compare a clip's settings with the sequence settings. It is usually pretty easy to flag an inconsistency this way and then change it. __________________ Tim Dashwood

February 25th, 2006, 02:42 PM	#4
Alen Tarassians Tourist Join Date: Feb 2006 Posts: 4	Thanks Tim. I have never set my bins to show columns before, but I'll try and see if I can find any inconsistency between the capture settings and sequence setting. I'll keep you posted. Alen.

February 25th, 2006, 10:19 PM	#5
Boyd Ostroff Wrangler Join Date: Dec 2002 Location: Mays Landing, NJ Posts: 11,787	Also remember, when you choose a new "easy setup" it only affects new sequences that you create, and doesn't change any existing sequences. Choose the 1080i50 easy setup, then create a new project. The capture and sequence settings for everything in that project should then be the same.

March 11th, 2006, 05:31 PM	#6
Alen Tarassians Tourist Join Date: Feb 2006 Posts: 4	Thank you guys, It's all working out, and I have started editing my project. Thank you again. Alen.