|
|
|
|
|
June 11th, 2008, 10:12 AM
|
#1 |
|
Regular Crew
Join Date: Sep 2006
Location: Malaysia
Posts: 71
|
DIY CRANE - Rectangular Bar Dimension
Hello im wondering if anyone could help me measure the height and width of their Pro Am Aluminum Rectangular Bar for both the top and bottom one ? (the small bar and the bigger bar) just feel like making my own crane thanks loads ! owh yea Any idea if its Aluminum or Steel ? thanks !!!
Ant |
|
|
|
June 11th, 2008, 07:12 PM
|
#3 |
|
Regular Crew
Join Date: Sep 2006
Location: Malaysia
Posts: 71
|
hey thanks for those. I made one before just that the material i chose was ergh.... too bulky hard to transport so would like to make one with those kinda rectangular bars like those used in Pro Am
|
|
|
|
|
June 12th, 2008, 01:00 PM
|
#4 |
|
Regular Crew
Join Date: Dec 2006
Location: Zagreb, Croatia
Posts: 171
|
I am using 70x70mm with 3mm sidewalls. Camera side arm will be around 3.5m long. I have made parts of 1m in length so it can be break down.
|
|
|
|
|
June 16th, 2008, 08:27 AM
|
#5 |
|
Regular Crew
Join Date: Dec 2004
Location: San Jose, Ca
Posts: 40
|
Hey Anthony, I have the 12' 250 and it's made of aluminum. It's off on a gig right now, but I believe its 2" high and 1" wide. As for the wall thickness I can't say until it comes home. The top bar that moves the head is roughly 3/4" high and about 1/8" thick, and is also made of aluminum.
if you need anymore info, just ask. James |
|
|
|
 |
| ||||||
|
||||||
|
|
